40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Entry  Tue Nov 25 17:12:01 2008, Aidan, Things to Buy, Fiber, Residual things to buy for FS adhikari_lab_v1C.jpg
    Reply  Wed Jan 14 11:33:58 2009, Aidan, Things to Buy, Fiber, Residual things to buy for FS - QWPs, HWPs, output coupler 
       Reply  Wed Jan 14 18:14:23 2009, Aidan, Things to Buy, Fiber, Residual things to buy for FS - extra photodiodes 
Message ID: 102     Entry time: Tue Nov 25 17:12:01 2008     Reply to this: 105
Author: Aidan 
Type: Things to Buy 
Category: Fiber 
Subject: Residual things to buy for FS 

A large fraction of the equipment is already in the lab from Masha's experiment earlier in the year. The following is required for the latest design of the experiment. In the interim we can probably use the Marconi to drive AOM1.


Specifics
---------
2x Half wave plates - QWPO-1064-05-2-R10
1x Quarter wave plate - QWPO-1064-05-4-R10
3x rotation stages - New Focus 9401


General
-------
Partially transmitting retro-reflector
AOM # 2
Mode-matching lenses (possibly - might have enough downstairs)
RF photodiodes - (10-MHz InGaAs Photoreceiver (Free Space input) Model 2053-FS?)
VCO + power amp for AOM#1 - center frequency probably 77.5MHz, ~2W to AOM
Crystal oscillator + power amp for AOM#2 - probably 80MHz, ~2W to AOM
Oscillator for demod - probably 5MHz, 17dBm

What else? hmm ...
Attachment 1: adhikari_lab_v1C.jpg  180 kB  | Hide | Hide all
adhikari_lab_v1C.jpg
ELOG V3.1.3-