Completed work of the previous months: [Jul] [Aug] [Sep] [Oct] [Nov] [Dec]

• Work done
  • Wedge measurement (1st trial) [ELOG]
  • RoC measurement [ELOG]

• Work in progress
  
  • R&T measurement
  • Wedge measurement
• Work to be done
  • QPD/PD pre-selections (QE/noise)
  •  
  •  
  •  
  • Misc. / Beaurocracy?
    • Continuous monitoring of the particle level
    • Replacing a file cabinet next to the south wall by a lockable cabinet
    • Ion gun safety issues: https://dcc.ligo.org/cgi-bin/private/DocDB/ShowDocument?docid=88631
    • Laser SOP / HV use? / UV?
• Things delivered
  • The ionized gun used in the clean room at Downs: made by Terra Universal.com (Jeff's room)
    http://www.terrauniversal.com/static-control/ionizing-blow-off-guns.php
  • Flow path: N2 cylinder - Filter - Gun (Jeff's room)
• Things ordered
  • Power strips Tripp Lite PS3612 (Ordered Nov. 8, Delivered Nov. 12)
  • Kapton tapes (1in x 6, 1/2in x 12 Delivered Nov. 15)
  • Sticky Mats (VWR 18888-216 Delivered Nov. 12 and 21992-042)
  • Duck tape (PK3) (Delivered Nov. 12)
  • Wipers 12"x12" 2ply x 119 pairs x case15 (Delivered Nov. 12)
  • Syringes (1mL&2mL) & Needles (20G x dozen)
  • Stainless trays with cover (Steve Delivered Nov. 12)
  • Gold Plated allen keys (Steve Delivered Nov. 12)
  • Forceps (Delivered Nov. 12) / Tweezers / Scissors (Delivered Nov. 12)
• Things to buy / get
  
  • OMC testing optics / opto-mechanics
  • Black Glass / Black Glass holder / AR ==> Some at the 40m, some from LLO
  • Ionized air blow
    • N2 or Air cylinder: 4N - UHP or 5N - Research Grade.  (... steal from Downs)
  • Clean tools, tray, storage
  • Supply
    
    • Additional clean supplies ~ glove 8.5,9,9.5
    • Stainless bats / Pure solvents (Metha / Aceton / Iso) / Syringes / Lint free cloth / Paper lens tissue
    • Lab coats
  • ATF
    • Tefron tape
    • Thorlabs 8-32 screw kit / Thorlabs HW-KIT1
    • Pedestal Shims - Newport
• Things to be done
  
  • Cavity ref/trans/finesse
  • PD Q.E. & Reflectivity measurement vs incident angle
  • Functionality test of QPD/PD (PeterK) /PZT
     

• Procedures to be decided
  • PZT alignment
  • UV glue? (heat) / gluing test
  • Balance
  • N2 cylinder/lines/filter
  • Shipping procedure: New shipping cage design on going (Jeff) => Plastic box similar to COC

• Design
  
  • Solidworks raytracing model
  • Mode design for HAM6 layout
     
• Things to be decided / confirmed
  • How to handle optics / assemblies (Talk to the prev people)
  • First contact? (Margot: applicable to a short Rc of ~2.5m)
  • Gluing templates to be designed (how to handle it?)

• Jitter noise?
• How to align the cavity mirrors, input mirrors, QPDs, PDs, beam dumps.

Electronics ==> Rich

A1
Horiz Wedge    0.497    +/-    0.004 deg
Vert Wedge      0.024    +/-    0.004 deg

A2
Horiz Wedge    0.549    +/-    0.004 deg
Vert Wedge      0.051    +/-    0.004 deg

A3
Horiz Wedge    0.463    +/-    0.004 deg
Vert Wedge      0.009    +/-    0.004 deg

A4
Horiz Wedge    0.471    +/-    0.004 deg
Vert Wedge      0.019    +/-    0.004 deg

A5
Horiz Wedge    0.458    +/-    0.004 deg
Vert Wedge      0.006    +/-    0.004 deg

Rich saids:

I have ordered a small roll of solder for the OMC piezos. 
The alloy is: Sn96.5 Ag3.0 Cu0.5

KA's question:

Do you know how to apply this epoxy?
Do we need a plunger and a needle for this purpose?

Nic saids:

When we did it with Sam, I seem to remember just squirting some on some foil then dabbing it on with the needle.

Optical prisms 50pcs (A14+B12+C6+E18)
Curved Mirrors 25pcs (C13+D12)

Now it's enough for the first OMC (or even second one too).
Today's measurements all distributed in theta>0.5deg. Is this some systematic effect???
I should check some of the compeled mirrors again to see the reproducibility...

A1    Horiz Wedge    0.497039    +/-    0.00420005    deg / Vert Wedge     0.02405210    +/-    0.00420061    deg

A2    Horiz Wedge    0.548849    +/-    0.00419993    deg / Vert Wedge     0.05087730    +/-    0.00420061    deg
A3    Horiz Wedge    0.463261    +/-    0.00420013    deg / Vert Wedge     0.00874441    +/-    0.00420061    deg
A4    Horiz Wedge    0.471536    +/-    0.00420011    deg / Vert Wedge     0.01900840    +/-    0.00420061    deg
A5    Horiz Wedge    0.458305    +/-    0.00420014    deg / Vert Wedge     0.00628961    +/-    0.00420062    deg

B1    Horiz Wedge    0.568260    +/-    0.00419988    deg / Vert Wedge    -0.00442885    +/-    0.00420062    deg
B2    Horiz Wedge    0.556195    +/-    0.00419991    deg / Vert Wedge    -0.00136749    +/-    0.00420062    deg
B3    Horiz Wedge    0.571045    +/-    0.00419987    deg / Vert Wedge     0.00897185    +/-    0.00420061    deg
B4    Horiz Wedge    0.563724    +/-    0.00419989    deg / Vert Wedge    -0.01139000    +/-    0.00420061    deg
B5    Horiz Wedge    0.574745    +/-    0.00419986    deg / Vert Wedge     0.01718030    +/-    0.00420061    deg
E1    Horiz Wedge    0.600147    +/-    0.00419980    deg / Vert Wedge     0.00317778    +/-    0.00420062    deg
E2    Horiz Wedge    0.582597    +/-    0.00419984    deg / Vert Wedge    -0.00537131    +/-    0.00420062    deg
E3    Horiz Wedge    0.592933    +/-    0.00419982    deg / Vert Wedge    -0.01082830    +/-    0.00420061    deg

-------

To check the systematic effect, A1 and B1 were tested with different alignment setup.

A1    Horiz Wedge    0.547056    +/-    0.00419994    deg / Vert Wedge    0.0517442    +/-    0.00420061    deg
A1    Horiz Wedge    0.546993    +/-    0.00419994    deg / Vert Wedge    0.0469938    +/-    0.00420061    deg
A1    Horiz Wedge    0.509079    +/-    0.00420003    deg / Vert Wedge    0.0240255    +/-    0.00420061    deg

B1    Horiz Wedge    0.547139    +/-    0.00419994    deg / Vert Wedge    0.0191204    +/-    0.00420061    deg



 

Mirror T test

The mirror was misaligned to have ~2deg incident (mistakenly...) angle.

C1: Ptrans = 7.58uW, Pinc = 135.0mW => 56.1ppm

C1 (take2): Ptrans = 7.30uW, Pinc = 134.4mW => 54.3ppm

C2: Ptrans = 6.91uW, Pinc = 137.3mW => 50.3ppm

C3: Ptrans = 6.27uW, Pinc = 139.7mW => 44.9ppm

C4: Ptrans = 7.62uW, Pinc = 139.3mW => 54.7ppm

C5: Ptrans = 6.20uW, Pinc = 137.5mW => 45.1ppm

A1: Ptrans = 1.094mW, Pinc = 133.6mW => 8189ppm

In order to resume testing the curvatures of the mirrors, the same mirror as the previous one was tested.
The result looks consistent with the previous measurement.

It seems that there has been some locking offset. Actually, the split peaks in the TF@83MHz indicates
the existence of the offset. Next time, it should be adjusted at the beginning.

Curved mirror SN: C1
RoC: 2.5785 +/- 0.000042 [m]

Previous measurements
=> 2.5830, 2.5638 => sqrt(RoC1*RoC2) = 2.5734 m
=> 2.5844, 2.5666 => sqrt(RoC1*RoC2) = 2.5755 m

C1: RoC: 2.57845 +/− 4.2e−05m

C2: RoC: 2.54363 +/− 4.9e−05m

C3: RoC: 2.57130 +/− 6.3e−05m   

C4: RoC: 2.58176 +/− 6.8e−05m

C5: RoC 2.57369 +/− 9.1e−05m

==> 2.576 +/- 0.005 [m] (C2 excluded)

The thicknesses of the prism mirrors (A1-A5) were measured with micrometer thickness gauge.
Since the thickness of the thinner side (side1) depends on the depth used for the measurement,
it is not accurate. Unit in mm.

A1: Side1: 9.916, Side2: 10.066 => derived wedge angle: 0.43deg
A2: Side1: 9.883, Side2: 10.065 => 0.52
A3: Side1: 9.932, Side2: 10.062 => 0.38
A4: Side1: 9.919, Side2: 10.060 => 0.40
A5: Side1: 9.917, Side2: 10.058 => 0.40

Steve and I visited Margot to have a training session for application of First Contact on optics.

- Make "thick" layer of first contact. It becomes thin when it gets dried.

- Apply more FC once a peek sheet is placed on the FC

- Wait for drying (~15min)

- Rip off the FC layer by pulling a peek tab. Make sure the ionized N2 is applied during ripping.

- Margot has a Dark Field Microscope. We checked how the dusts are removed from the surface.
There are many dusts on the mirror even if they are invisible. First Contact actually removes
these dusts very efficiently. Margot told us that even carbonhydrates (like finger prints) can be removed by FC.

Two switches are connected in series.

Completed work of the previous months: [Jul] [Aug] [Sep] [Oct] [Nov] [Dec]

• Work done
  • Wedge measurement (1st trial) [ELOG]
  • RoC measurement [ELOG]
  • Laser SOP draft

• Things delivered
  • The ionized gun used in the clean room at Downs: made by Terra Universal.com (Jeff's room)
    http://www.terrauniversal.com/static-control/ionizing-blow-off-guns.php
  • Flow path: N2 cylinder - Filter - Gun (Jeff's room)
  • Power strips Tripp Lite PS3612 (Ordered Nov. 8, Delivered Nov. 12)
  • Kapton tapes (1in x 6, 1/2in x 12 Delivered Nov. 15)
  • Sticky Mats (VWR 18888-216 Delivered Nov. 12 and 21992-042)
  • Duck tape (PK3) (Delivered Nov. 12)
  • Wipers 12"x12" 2ply x 119 pairs x case15 (Delivered Nov. 12)
  • Syringes (1mL&2mL) & Needles (20G x dozen)
  • Stainless trays with cover (Steve Delivered Nov. 12)
  • Gold Plated allen keys (Steve Delivered Nov. 12)
  • Forceps (Delivered Nov. 12) / Tweezers / Scissors (Delivered Nov. 12)
  • OMC testing optics / opto-mechanics
  • SolidWorks raytracing model
  • Mode design for HAM6 layout [Zach]
     
  • Black Glass / Black Glass holder / AR ==> Some at the 40m, some from LLO
  • Ionized air blow
    • N2 or Air cylinder: 4N - UHP or 5N - Research Grade.  (... steal from Downs)

Total (excluding C2, C7, C8): 2.575 +/- 0.005 [m]

New results

C6: RoC: 2.57321 +/− 4.2e-05m

C7: RoC: 2.56244 +/− 4.0e−05m ==> Polaris mount

C8: RoC: 2.56291 +/− 4.7e-05m ==> Ultima mount

C9: RoC: 2.57051 +/− 6.7e-05m

Previous results

C1: RoC: 2.57845 +/− 4.2e−05m

C2: RoC: 2.54363 +/− 4.9e−05m ==> Josh Smith @Fullerton for scattering measurement

C3: RoC: 2.57130 +/− 6.3e−05m   

C4: RoC: 2.58176 +/− 6.8e−05m

C5: RoC 2.57369 +/− 9.1e−05m

Measured the thickness of a curved mirror:

Took three points separated by 120 degree.

S/N: C2, (0.2478, 0.2477, 0.2477) in inch => (6.294, 6.292, 6.292) in mm

Conclusion: Good. First contact did not damage the coating surface, and reduced the loss

- Construct a cavity with A1 and C2

- Measure the transmission and FWHM (of TEM10 mode)

- Apply First Contact on both mirrors

- Measure the values again

Transmission:

2.66 +/- 0.01 V -> 2.83  +/- 0.01 V

==> 6.3% +/- 0.5 % increase

FWHM of TEM10:

Before: (66.1067, 65.4257, 66.1746) +/- (0.40178, 0.38366, 0.47213) [kHz]
After: (60.846, 63.4461, 63.7906) +/- (0.43905, 0.56538, 0.51756) [kHz]

==> 5.1% +/- 2.7% decrease

Question: What is the best way to measure the finesse of the cavity?

Yesterday I measured the thickness of the PZTs in order to get an idea how much the PZTs are wedged.

For each PZT, the thickness at six points along the ring was measured with a micrometer gauge.
The orientation of the PZT was recognized by the wire direction and a black marking to indicate the polarity.

A least square fitting of these six points determines the most likely PZT plane.
Note that the measured numbers are assumed to be the thickness at the inner rim of the ring
as the micrometer can only measure the maximum thickness of a region and the inner rim has the largest effect on the wedge angle.
The inner diameter of the ring is 9mm.



The measurements show all PZTs have thickness variation of 3um maximum.

The estimated wedge angles are distributed from 8 to 26 arcsec. The directions of the wedges seem to be random
(i.e. not associated with the wires)



As wedging of 30 arcsec causes at most ~0.3mm spot shift of the cavity (easy to remember),
the wedging of the PZTs is not critical by itself. Also, this number can be reduced by choosing the PZT orientations
based on the estimated wedge directions --- as long as we can believe the measurements.



Next step is to locate the minima of each curved mirror. Do you have any idea how to measure them?

The items:

- Autocollimator (AC) borrowed from Mike Smith (Nippon Kogaku model 305, phi=2.76", 67.8mm)

- Retroreflector (corner cube)

- Two V grooves borrowed from the 40m

Procedure:

- Autocollimator calibration

o Install the AC on a optical table

o Locate the corner cube in front of the AC.

o Adjust the focus of the AC so that the reflected reticle pattern can be seen.

o If the retroreflection and the AC are perfect, the reference reticle pattern will match with the reflected reticle pattern.

o Measure the deviation of the reflected reticle from the center.

o Rotate the retroreflector by 90 deg. Measure the deviation again.

o Repeat the process until total four coordinates are obtained.

o Analysis of the data separates two types of the error:
   The average of these four coordinates gives the systematic error of the AC itself.
   The vector from the center of the circle corresponds to the error of the retroreflector.

- Wedge angle measurement

To be continued

An autocollimator (AC) should show (0,0) if a retroreflector is placed in front of the AC.
However, the AC may have an offset. Also the retroreflector may not reflect the beam back with an exact parallelism.

To calibrate these two errors, the autocollimator is calibrated. The retroreflector was rotated by 0, 90, 180, 270 deg
while the reticle position are monitored. The images of the autocollimator were taken by my digital camera looking at the eyepiece of the AC.

Note that 1 div of the AC image corresponds to 1arcmin.

Basically the rotation of the retroreflector changed the vertical and horizontal positions of the reticle pattern by 0.6mdeg and 0.1mdeg
(2 and 0.4 arcsec). Therefore the parallelism of the retrorefrector is determined to be less than an arcsec. This is negligibly good for our purpose.

The offset changes by ~1div in a slanted direction if the knob of the AC, whose function is unknown, is touched.
So the knob should be locked, and the offset should be recorded before we start the actual work every time.

The wedge angle of the prism "A1" was measured with the autocollimator (AC).

The range of the AC is 40 arcmin. This means that the mirror tilt of 40arcmin can be measured with this AC.
This is just barely enough to detect the front side reflection and the back side reflection.

The measured wedge angle of the A1 prism was 0.478 deg.

Ideally a null measurement should be done with a rotation stage.

A carpenter has come to install the eyeware storage and hooks for the face shields.

Newport UTR80

• Sensitivity: 4 arcsec
• Graduations: 1 deg
• Vernier: 1 arcmin
• Fine travel range: 4 deg
• No microemeter
• http://www.newport.com/UTR-A-Series-Precision-Steel-Rotation-Stages-with/144549/1033/info.aspx#tab_Specifications

Newport 481-A (SELECTED)

• Sensitivity: 15 arcsec
• Graduations: 1 deg
• Vernier: 5 arcmin
• Fine travel range: 5 deg
• With Micrometer

Newport RS40

• Sensitivity: 16 arcsec
• Graduations: 2 deg
• Vernier: 12 arcmin
• Fine travel range: 10 deg
• Micrometer BM11.5

Newport RS65

• Sensitivity: 11 arcsec
• Graduations: 2 deg
• Vernier: 12 arcmin
• Fine travel range: 10 deg
• Micrometer SM-06 to be bought separately

Elliot science MDE282-20G

• Sensitivity: 5 arcsec
• Graduations: 2 deg
• Vernier: 10 arcmin
• Fine travel range: 10 deg
• Micrometer 2 arcmin/1div
• Metric

Suruga precision B43-110N

• Sensitivity: ? arcsec
• Graduations: 2 deg
• Vernier: 6 arcmin
• Fine travel range: 10 deg
• Micrometer 34 arcsec/div
• http://www.suruga-ost.com/product.php?n=020401228
• Metric

Thorlabs precision B43-110N

• Sensitivity: ? arcsec
• Graduations: 1 deg
• Vernier: 5 arcmin
• Fine travel range: 14 deg
• Micrometer 144 arcsec/div
• http://www.thorlabs.com/thorProduct.cfm?partNumber=PR01

Method:

• Mount the tombstone prism on the prism mount. The mount is fixed on the rotation stage.
• Locate the prism in front of the autocollimator.
• Find the retroreflected reticle in the view. Adjust the focus if necessary.
• Confirm that the rotation of the stage does not change the height of the reticle in the view. 

  If it does, rotate the AC around its axis to realize it.
  This is to match the horizontal reticle to the rotation plane.
• Use the rotation stage and the alignment knobs to find the reticle at the center of the AC.
Make sure the reticle corresponds to the front surface.
• Record the micrometer reading.
• Rotate the micrometer of the rotation stage until the retroreflected reticle for the back surface.
• There maybe the vertical shift of the reticle due to the vertical wedging. Record the vertical shi
• Record the micrometer reading. Take a difference from the previous value.
   

Measurement:

• A1: α = 0.68 deg, β = 0 arcmin (0 div)
• A2: α = 0.80 deg, β = -6 arcmin (3 div down)
• A3: α = 0.635 deg, β = -1.6 arcmin (0.8 div down)
• A4: α = 0.650 deg, β = 0 arcmin (0div)
• A5: α = 0.655 deg, β = +2.4 arcmin (1.2 div up)

Analysis:

• \theta_H = ArcSin[Sin(α) / n]
• \theta_V = ArcSin[Sin(β) / n]/2
   
• A1: \theta_H = 0.465 deg, \theta_V = 0.000 deg
• A2: \theta_H = 0.547 deg, \theta_V = -0.034 deg
• A3: \theta_H = 0.434 deg, \theta_V = -0.009 deg
• A4: \theta_H = 0.445 deg, \theta_V = 0.000 deg
• A5: \theta_H = 0.448 deg, \theta_V = 0.014 deg

Measurement:

• A6:   α = 0.665 deg, β = +3.0 arcmin (1.5 div up)
• A7:   α = 0.635 deg, β =   0.0 arcmin (0.0 div up)
• A8:   α = 0.623 deg, β = - 0.4 arcmin (-0.2 div up)
• A9:   α = 0.670 deg, β = +2.4 arcmin (1.2 div up)
• A10: α = 0.605 deg, β = +0.4 arcmin (0.2 div up)
• A11: α = 0.640 deg, β = +0.8 arcmin (0.4 div up)
• A12: α = 0.625 deg, β = - 0.6 arcmin (-0.3 div up)
• A13: α = 0.630 deg, β = +2.2 arcmin (1.1 div up)
• A14: α = 0.678 deg, β =   0.0 arcmin (0.0 div up)
• B1:   α = 0.665 deg, β = +0.6 arcmin (0.3 div up)
• B2:   α = 0.615 deg, β = +0.2 arcmin (0.1 div up)
• B3:   α = 0.620 deg, β = +0.9 arcmin (0.45 div up)
• B4:   α = 0.595 deg, β = +2.4 arcmin (1.2 div up)
• B5:   α = 0.635 deg, β = - 1.8 arcmin (-0.9 div up)
• B6:   α = 0.640 deg, β = +1.6 arcmin (0.8 div up)
• B7:   α = 0.655 deg, β = +2.5 arcmin (1.25 div up)
• B8:   α = 0.630 deg, β = +2.8 arcmin (1.4 div up)
• B9:   α = 0.620 deg, β = - 4.0 arcmin (-2.0 div up)
• B10: α = 0.620 deg, β = +1.2 arcmin (0.6 div up)
• B11: α = 0.675 deg, β = +3.5 arcmin (1.75 div up)
• B12: α = 0.640 deg, β = +0.2 arcmin (0.1 div up)

Analysis:

• \theta_H = ArcSin[Sin(α) * n]
• \theta_V = ArcSin[Sin(β) / n]/2
   
• A6:   \theta_H = 0.490 deg, \theta_V =  0.017 deg
• A7:   \theta_H = 0.534 deg, \theta_V =  0.000 deg
• A8:   \theta_H = 0.551 deg, \theta_V = -0.0023 deg
• A9:   \theta_H = 0.482 deg, \theta_V =  0.014 deg
• A10: \theta_H = 0.577 deg, \theta_V =  0.0023 deg
• A11: \theta_H = 0.526 deg, \theta_V =  0.0046 deg
• A12: \theta_H = 0.548 deg, \theta_V = -0.0034 deg
• A13: \theta_H = 0.541 deg, \theta_V =  0.013 deg
• A14: \theta_H = 0.471 deg, \theta_V =  0.000 deg
• B1:   \theta_H = 0.490 deg, \theta_V =  0.0034 deg
• B2:   \theta_H = 0.563 deg, \theta_V =  0.0011 deg
• B3:   \theta_H = 0.556 deg, \theta_V =  0.0051 deg
• B4:   \theta_H = 0.592 deg, \theta_V =  0.014 deg
• B5:   \theta_H = 0.534 deg, \theta_V = -0.010 deg
• B6:   \theta_H = 0.526 deg, \theta_V =  0.0091 deg
• B7:   \theta_H = 0.504 deg, \theta_V =  0.014 deg
• B8:   \theta_H = 0.541 deg, \theta_V =  0.016 deg
• B9:   \theta_H = 0.556 deg, \theta_V = -0.023 deg
• B10: \theta_H = 0.556 deg, \theta_V =  0.0068 deg
• B11: \theta_H = 0.475 deg, \theta_V =  0.020 deg
• B12: \theta_H = 0.526 deg, \theta_V =  0.0011 deg

Dmass borrowed the LB1005 servo amp from the OMC lab.
It happened this week although it seems still January in his head. Got it back on Mar 24th

The A2 and C2 mirrors have been sent to Josh Smith at Fullerton for the scatterometer measurement.

First Contact kit (incl. Peek Sheets)
Manasa borrowed the kit on Feb 7. Got it back to the lab.

 [Jeff, Yuta, Koji]

Gluing test with UV-cure epoxy Optocast 3553-LV-UTF-HM

- This glue was bought in the end of October (~3.5 months ago).

- The glue was taken out from the freezer at 1:20pm.
- Al sheet was laid on the optical table. We made a boat with Al foil and pour the glue in it (@1:57pm)
- We brought two kinds of Cu wires from the 40m. The thicker one has the diameter of 1.62mm.
The thinner one has the diameter of 0.62mm. We decided to use thinner one being cut into 50mm in length.

- The OMC glass prisms have the footprint of 10mmx20mm = 200mm^2. We tested several combinations
of the substrates. Pairs of mirrors with 1/2" mm in dia. (127mm) and a pair of mirrors with 20mm in dia. (314mm).

- Firstly, a pair of 1/2" mirrors made of SF2 glass was used. A small dub on a thinner Cu wire was deposited on a mirror.
  We illuminated the glue for ~10sec. When the surfaces of the pair was matched, the glue did not spread on the entire
  surface. The glue was entirely spread once the pressure is applied by a finger. Glue was cured at 2:15pm. 12.873mm
  thickness after the gluing.

Some remark:
1. We should be careful not to shine the glue pot by the UV illuminator.
2. The gluing surface should be drag wiped to remove dusts on the surface.

- Secondly, we moved onto 20mm mirror pair taken from the remnant of the previous gluing test by the eLIGO people.
This time about 1.5 times more glue was applied.

- The third trial is to insert small piece of alminum foil to form a wedge. The thickness of the foil is 0.041mm.
The glue was applied to the pair of SF2 mirror (1/2" in dia.). A small dub (~1mm in dia) of the glue was applied.
The glue filled the wedge without any bubble although the glue tried to slide out the foil piece from the wedge.
So the handling was a bit difficult. After the gluing we measured the thickness of the wedge by a micrometer gauge.
The skinny side was 12.837mm, and the thicker side was 12.885mm. This is to be compared with the total thickness
12.823mm before the gluing. The wedge angle is 3.8mrad (0.22deg). The glue dub was applied at 2:43, and the UV
illumination was applied at 2:46.

- At the end we glued a pair of fused silica mirrors. The total thickness before the gluing was 12.658 mm.
The glue was applied at 2:59pm. The thickness after the gluing is 12.663 mm.
This indicates the glue thickess is 5um.

Perpendicularity test of the mounting prisms:

The perpendicularity of the prism pieces were measured with an autocollimator.

Two orthogonally jointed surfaces forms a part of a corner cube.
The deviation of the reflected image from retroreflection is the quantity measured by the device.

When the image is retroreflected, only one horizontal line is observed in the view.
If there is any deviation from the retroreflection, this horizontal line splits into two
as the upper and lower halves have the angled wavefront by 4x\theta. (see attached figure)

The actual reading of the autocollimator is half of the wavefront angle (as it assumes the optical lever).
Therefore the reading of the AC times 30 gives us the deviation from 90deg in the unit of arcsec.

SN / measured / spec

SN10: 12.0 arcsec (29 arcsec)

SN11: 6.6 arcsec (16 arcsec)

SN16: 5.7 arcsec (5 arcsec)

SN20: -17.7 arcsec (5 arcsec)

SN21: - 71.3 arcsec (15 arcsec)

Mounting Prisms:
(criteria: 30arcsec = 145urad => 0.36mm spot shift)
SN  Meas.(div) ArcSec Spec.
10   0.3989    11.97   29    good
11   0.2202     6.60   16    good
16   0.1907     5.72    5    good
20  -0.591    -17.73    5    good
21  -2.378    -71.34   15

21  -1.7      -51.     15
01  -0.5      -15.     52
02  -2.5      -75.     48
06  -1.0      -30.     15    good
07   1.7       51.     59
12  -2.2      -66.     40
13  -0.3      - 9.     12    good
14  -2.8      -84.     27
15  -2.5      -75.     50
17   0.7       21.     48
22   2.9       87.     63

Mirror A:
A1  -0.5      -15.     NA    good
A3   0.5       15.     NA    good
A4   0.9       27.     NA    good
A5   0.4       12.     NA    good
A6   0.1        3.     NA    good
A7   0.0        0.     NA    good
A8   0.0        0.     NA    good
A9   0.0        0.     NA    good
A10  1.0       30.     NA    good
A11  0.3        9.     NA    good
A12  0.1        3.     NA    good
A13  0.0        0.     NA    good
A14  0.6       18.     NA    good

Mirror B:
B1  -0.9      -27.     NA    good
B2  -0.6      -18.     NA    good
B3  -0.9      -27.     NA    good
B4   0.7       21.     NA    good
B5  -1.1      -33.     NA
B6  -0.6      -18.     NA    good
B7  -1.8      -54.     NA
B8  -1.1      -33.     NA
B9   1.8       54.     NA
B10  1.2       36.     NA   
B11 -1.7      -51.     NA
B12  1.1       33.     NA


Perpendicularity of the "E" mirror was measured.

Mounting Prisms:
(criteria: 30arcsec = 145urad => 0.36mm spot shift)
SN  Meas.(div) ArcSec Spec.
10   0.3989    11.97   29    good
11   0.2202     6.60   16    good
16   0.1907     5.72    5    good
20  -0.591    -17.73    5    good
21  -2.378    -71.34   15

21  -1.7      -51.     15
01  -0.5      -15.     52
02  -2.5      -75.     48
06  -1.0      -30.     15    good
07   1.7       51.     59
12  -2.2      -66.     40
13  -0.3      - 9.     12    good
14  -2.8      -84.     27
15  -2.5      -75.     50
17   0.7       21.     48
22   2.9       87.     63

Mirror A:
A1  -0.5      -15.     NA    good
A3   0.5       15.     NA    good
A4   0.9       27.     NA    good
A5   0.4       12.     NA    good
A6   0.1        3.     NA    good
A7   0.0        0.     NA    good
A8   0.0        0.     NA    good
A9   0.0        0.     NA    good
A10  1.0       30.     NA    good
A11  0.3        9.     NA    good
A12  0.1        3.     NA    good
A13  0.0        0.     NA    good
A14  0.6       18.     NA    good

Mirror B:
B1  -0.9      -27.     NA    good
B2  -0.6      -18.     NA    good
B3  -0.9      -27.     NA    good
B4   0.7       21.     NA    good
B5  -1.1      -33.     NA
B6  -0.6      -18.     NA    good
B7  -1.8      -54.     NA
B8  -1.1      -33.     NA
B9   1.8       54.     NA
B10  1.2       36.     NA   
B11 -1.7      -51.     NA
B12  1.1       33.     NA

Mirror E:
E1  -0.8      -24.     NA    good
E2  -0.8      -24.     NA    good
E3  -0.25     - 7.5    NA    good
E4  -0.5      -15.     NA    good
E5   0.8       24.     NA    good
E6  -1.0      -30.     NA    good
E7  -0.2      - 6.     NA    good
E8  -0.8      -24.     NA    good
E9  -1.0      -30.     NA    good
E10  0.0        0.     NA    good
E11 -1.0      -30.     NA    good
E12 -0.3      - 9.     NA    good
E13 -0.8      -24.     NA    good
E14 -1.0      -30.     NA    good
E15 -1.2      -36.     NA
E16 -0.7      -21.     NA    good
E17 -0.8      -24.     NA    good
E18 -1.0      -30.     NA    good



Measurement:

• E1:   α = 0.672 deg, β = +0.0 arcmin (0 div up)
• E2:   α = 0.631 deg, β = - 0.3 arcmin (-0.15 div down)
• E3:   α = 0.642 deg, β = +0.0 arcmin (0 div up)
• E4:   α = 0.659 deg, β = +1.4 arcmin (0.7 div up)
• E5:   α = 0.695 deg, β = +0.5 arcmin (0.5 div up)
• E6:   α = 0.665 deg, β = - 0.4 arcmin (-0.2 div down)
• E7:   α = 0.652 deg, β = +1.0 arcmin (0.5 div up)
• E8:   α = 0.675 deg, β = +2.0 arcmin (1.0 div up)
• E9:   α = 0.645 deg, β = - 2.4 arcmin (-1.2 div down)
• E10: α = 0.640 deg, β = +2.2 arcmin (1.1 div up)
• E11: α = 0.638 deg, β = +1.6 arcmin (0.8 div up)
• E12: α = 0.660 deg, β = +1.6 arcmin (0.8 div up)
• E13: α = 0.638 deg, β = +0.8 arcmin (0.4 div up)
• E14: α = 0.655 deg, β = +0.4 arcmin (0.2 div up)
• E15: α = 0.640 deg, β = +1.4 arcmin (0.7 div up)
• E16: α = 0.655 deg, β = +0.6 arcmin (0.3 div up)
• E17: α = 0.650 deg, β = +0.8 arcmin (0.4 div up)
• E18: α = 0.640 deg, β = +2.4 arcmin (1.2 div up)

Analysis:

• \theta_H = ArcSin[Sin(α) / n]
• \theta_V = ArcSin[Sin(β) / n]/2
   
• E1:   \theta_H = 0.460 deg, \theta_V =   0.000 deg
• E2:   \theta_H = 0.432 deg, \theta_V =  -0.0034 deg
• E3:   \theta_H = 0.439 deg, \theta_V =   0.000 deg
• E4:   \theta_H = 0.451 deg, \theta_V =  0.016 deg
• E5:   \theta_H = 0.475 deg, \theta_V =  0.011 deg
• E6:   \theta_H = 0.455 deg, \theta_V =  -0.0046 deg
• E7:   \theta_H = 0.446 deg, \theta_V =  0.011 deg
• E8:   \theta_H = 0.462 deg, \theta_V =  0.023 deg
• E9:   \theta_H = 0.441 deg, \theta_V =  -0.027 deg
• E10:   \theta_H = 0.438 deg, \theta_V = 0.025 deg
• E11:   \theta_H = 0.436 deg, \theta_V = 0.018 deg
• E12:   \theta_H = 0.451 deg, \theta_V = 0.018 deg
• E13:   \theta_H = 0.436 deg, \theta_V = 0.0091 deg
• E14:   \theta_H = 0.448 deg, \theta_V = 0.0046 deg
• E15:   \theta_H = 0.438 deg, \theta_V = 0.016 deg
• E16:   \theta_H = 0.448 deg, \theta_V = 0.0068 deg
• E17:   \theta_H = 0.444 deg, \theta_V = 0.0091 deg
• E18:   \theta_H = 0.438 deg, \theta_V = 0.027 deg

EDIT (ZK): All photos on Picasa. Also, I discovered that since Picasa was migrated to Google+ only,
you no longer have the option to embed a slideshow like you used to. Lame, Google.

Photos sent from Zach

(3D VIEW)

ALL returned

Loan from ATF:

2 blue banana cables returned on Jun 4, 2013

BNC cable returned on Mar 21, 2013

TENMA triple power supply returned on July 17, 2015

From 40m:

4x GPIB cables returned on Mar 21, 2013

From EE shop:

red banana cables returned on Jun 4, 2013

Diode testing

o Purpose of the measurement

- Test Si QPDs (C30845EH) for ISC QPDs Qty 30 (i.e. 120 elements)

- Test InGaAs PDs (C30665GH) for OMC Qty 10 (i.e. 10 elements)

o Measurement Kit

- Inherited from Frank.

- Has relays in it.

- D0 and D1 switches the measurement instrument connected to an element

- D2 and D3 switches the element of the QPDs

- Digital switch summary

d0 d1 0 0 - ln preamp
d0 d1 1 0 - dark c
d0 d1 0 1 - omc preamp
d0 d1 1 1 - impedance

d2 d3 0 0 - A x x x
d2 d3 1 0 - C x o x
d2 d3 0 1 - B o x o
d2 d3 1 1 - D o o o

- The universal board in the box is currently configured for C30845.
  Pin1 - Elem A. Pin3 - B, Pin7 - C, Pin9 - D, Pin 12 - Case&Bias

o Labview interface

- Controls NI-USB-6009 USB DAQ interface and Agilent 82357B USB-GPIB interface

o Dark current measurement

- Borrowed Peter's source meter KEITHLEY 2635A

- For C30845GH the maxmum reverse bias is set to -20V. This drops the voltage of the each element to the bias voltage.

o Spectrum measurement

- The elements are connected to FEMTO LN current amp DLPCA-200.

- Bias voltage is set to +10V. This lifts up the outside of the amplifier input to +10V.

o Impedance measurement

- Agilent 4395A at PSL lab with impedance measurement kit

- For C30845GH the maxmum reverse bias is set to -15V. This drops the voltage of the each element to the bias voltage.

- Calibration: open - unplug the diode from the socket, short - use a piece of resister lead, 50Ohm - a thin metal resister 51Ohm

- Freq range: 30-50MHz where the response of the cables in the setup is mostly flat.

- Labview VI is configured to read the equivalent circuit parameters in the configuration "D" (series LCR).

- Labview fails to read the series resistance. This was solved by first read the equiv circuit param and then read it with Sim F-CHRST.
  F-CHRST does nothing on the parameters so the second request successfully acquires the first ones.

- For the dark noise measurement, the lid of the die-cast case should also contact to the box for better shielding. This made the 60Hz lines almost completely removed, although unknown 1kHz harmonics remains.

- The precise impedance of the setup can not be obtained from the measurement box; the cable in between is too long. The diode impedance should be measured with the impedance measurement kit.

- With the impedance measurement kit, the bias voltage of +5V should be used, in stead of -5V.

- diode characteristics measured at 10-100MHz

- Typical impedance characteristics of the diodes

Excelitas (Perkin-Elmer) C30665GH Rs=9Ohm, Cd=220pF, L=0~1nH (Vr=5V)

Excelitas (Perkin-Elmer) C30642G Rs=12Ohm, Cd=100pF, L=~5nH (Vr=5V) longer thin wire in a can?

Excelitas (Perkin-Elmer) C30641GH Rs=8Ohm, Cd=26pF, L=12nH (Vr=5V) leg inductance? (leg ~30mm)

- PD serial

C30665GH, Ls ~ 1nH

  1 - 0782 from PK, Rs=8.3Ohm, Cd=219.9pF
  2 - 1139 from PK, Rs=9.9Ohm, Cd=214.3pF
  3 - 0793 from PK, Rs=8.5Ohm, Cd=212.8pF
  4 - 0732 from PK, Rs=7.4Ohm, Cd=214.1pF
  5 - 0791 from PK, Rs=8.4Ohm, Cd=209.9pF
  6 - 0792 from PK, Rs=8.0Ohm, Cd=219.0pF
  7 - 0787 from PK, Rs=9.0Ohm, Cd=197.1pF
  8 - 0790 from PK, Rs=8.4Ohm, Cd=213.1pF
  9 - 0781 from PK, Rs=8.2Ohm, Cd=216.9pF
10 - 0784 from PK, Rs=8.2Ohm, Cd=220.0pF
11 - 1213 from the 40m, Rs=10.0Ohm, Cd=212.9pF
12 - 1208 from the 40m, Rs=9.9Ohm, Cd=216.8pF
13 - 1209 from the 40m, Rs=10.0Ohm, Cd=217.5pF

C30642G, Ls ~ 12nH

20 - 2484 from the 40m EG&G, Rs=12.0Ohm, Cd=99.1pF
21 - 2487 from the 40m EG&G, Rs=14.2Ohm, Cd=109.1pF
22 - 2475 from the 40m EG&G glass crack, Rs=13.5Ohm, Cd=91.6pF
23 - 6367 from the 40m ?, Rs=9.99Ohm, Cd=134.7pF
24 - 1559 from the 40m Perkin-Elmer GH, Rs=8.37Ohm, Cd=94.5pF
25 - 1564 from the 40m Perkin-Elmer GH, Rs=7.73Ohm, Cd=94.5pF
26 - 1565 from the 40m Perkin-Elmer GH, Rs=8.22Ohm, Cd=95.6pF
27 - 1566 from the 40m Perkin-Elmer GH, Rs=8.25Ohm, Cd=94.9pF
28 - 1568 from the 40m Perkin-Elmer GH, Rs=7.83Ohm, Cd=94.9pF
29 - 1575 from the 40m Perkin-Elmer GH, Rs=8.32Ohm, Cd=100.5pF

C30641GH, Perkin Elmer, Ls ~ 12nH

30 - 8983 from the 40m Perkin-Elmer, Rs=8.19Ohm, Cd=25.8pF
31 - 8984 from the 40m Perkin-Elmer, Rs=8.39Ohm, Cd=25.7pF
32 - 8985 from the 40m Perkin-Elmer, Rs=8.60Ohm, Cd=25.2pF
33 - 8996 from the 40m Perkin-Elmer, Rs=8.02Ohm, Cd=25.7pF
34 - 8997 from the 40m Perkin-Elmer, Rs=8.35Ohm, Cd=25.8pF
35 - 8998 from the 40m Perkin-Elmer, Rs=7.89Ohm, Cd=25.5pF
36 - 9000 from the 40m Perkin-Elmer, Rs=8.17Ohm, Cd=25.7pF

Note:
  1mm Au wire with dia. 10um -> 1nH, 0.3 Ohm
20mm BeCu wire with dia. 460um -> 18nH, 0.01 Ohm

Preparation for ionized N2 blow

- 99.9998% N2 cylinder delivered (ALPHAGAZ 2 grade by AIR LIQUIDE) ALPHAGAZ 2 [PDF]

- Filter and Arcing module already in the lab

- A brass regulator to be installed (Done - March 24)

- 50 ft air line already in the lab / needs to be wiped/rinsed (Done - March 24)

- Air line and filter installed (Done - March 24)

Received black glass beam dumps from MIT

- gluing by EP30-2 looks pretty fine. Enough sturdy.

- some gap visible between the glass => incident angle should be considered so that the first beam does not exit from the gap

- Dusts are visible on the glass surface. Some have a lot, the other have less. But every piece still needs to be wiped.

Prototype PZT assembly

Motivation:

Before we glue the PZT assembly, we need to build a prototype. This is to confirm the heat cure process
does not cause any cracking of the PZT or glass components. The CTE of the PZT is 2~3ppm
(depends on the direction) while the one for Fused Silica is 0.55ppm.

Materials:

- A fused silica substrate, 1/2" in dia. Supplied from Garilynn. I defined the chamfered side as the front side.

- PZT: Noliac NAC2124, serial #24, this is a spare PZT as this has the worst length to angle coupling.

- Mounting Prism: D1102069 SN22. This has the worst perpendicularity among the prisms.

- Fixtures:

D1300185 aLIGO OMC CURVED MIRROR BONDING FIXTURE ASSY
D1300186 aLIGO OMC CURVED MIRROR BONDING FIXTURE FRONT
D1300187 aLIGO OMC CURVED MIRROR BONDING FIXTURE BACK
D1300188 aLIGO OMC CURVED MIRROR BONDING FIXTURE RING

Procedure:

- Wipe all of the components with the isopropanol.

- Attach the back piece of the fixture on the Al wrapped bracket.
(The current 4-40 screws for the middle piece are too long and stick out from the back side of the back piece.
Therefore a 1/16" shim for a 1/2" rod is inserted between the bracket and the back piece)

- Brought a glue package to the lab (10:40PM)

- Loosely attach the middle piece to the back piece with four 4-40 screws.

- Insert the mounting prism in the fixture. Insert the PZT in the fixture too.

- Insert a dummy substrate in the fixture.

- Attach the front piece with spring loaded screws.

- Align the PZT and the optic in the fixture. (Basically apply downward force to them)

- Test the rigidity of the assembly (11:30PM)

- Remove the PZT and the mirror. Apply UV epoxy.
(A single dub was applied for each PZT surface of the PZT but this was too much.)

- Make sure the PZT and the optic are aligned by applying the downward force.

- Illuminate UV light from the front.

- Illuminate UV light from the back. (11:50PM)

Procedural issues:

- Long 4-40 screws (described above)
(Circumvented)

- As the PZT is not constrained with the middle piece, it tends to move vertically and rotationally
because of the wire tension. (This is not a mistake but the design so that the PZT is constrained by the optic.)
Therefore after applying glue on the PZT, the motion of the PZT spreads the glue on the back surface of
the curved mirror.
(Solution to be tried) Our solution is to glue the PZT and the mounting prism first with a dummy optics (made of SF2).
The wires should be tacked somewhere on the mount 

- The amount of glue on the PZT was too much. I gave one dub of glue for each side.
As a result, excess glue leaks out along the ring.

- The front plate has a chamfered hole but this tends to slip and move the mirror vertically.
Later I used the flat side of the plate to hole the mirror.
(Circumvented) It seems that this hold the mirror in a better way as the plate can't rock

- Spring load for the front plate was too strong. This was because the natural length of the spring was too long.
(Circumvented) The spring was cut at the length of the 4-40 screw. Then attaching the screws became completely fine.

Result:

Slide show:

Quantum efficiencies of the C30665GH diodes were measured. 

- The diode was biased by the FEMTO preamplifier.

- Diode Pin 1 Signal, Pin 2 +5V, Pin 3 open

- Preamp gain 10^3 V/A

- Beam power was measured by the thorlabs power meter.

PD #1
Incident: 12.82 +/- 0.02 mW
Vout: 9.161 +/- 0.0005 V
PD Reflection (Prompt): 0.404 mW
PD Reflection (Total): 1.168 mW

PD #2
Incident: 12.73 +/- 0.02 mW
Vout: 9.457 +/- 0.0005 V
PD Reflection (Prompt): 0.364 mW
PD Reflection (Total): 0.937 mW

PD #3
Incident: 12.67 +/- 0.02 mW
Vout: 9.1139 +/- 0.01 V
PD Reflection (Prompt): 0.383 mW
PD Reflection (Total): 1.272 mW

PD #4
Incident: 12.71 +/- 0.02 mW
Vout: 9.3065 +/- 0.0005 V
PD Reflection (Prompt): 0.393 mW
PD Reflection (Total): 1.033 mW

PD #5
Incident: 12.69 +/- 0.02 mW
Vout: 9.1071 +/- 0.005 V
PD Reflection (Prompt): 0.401 mW
PD Reflection (Total): 1.183 mW

PD #6
Incident: 12.65 +/- 0.02 mW
Vout: 9.0310 +/- 0.01 V
PD Reflection (Prompt): 0.395 mW
PD Reflection (Total): 1.306 mW

PD #7
Incident: 12.67 +/- 0.02 mW
Vout: 9.0590 +/- 0.0005 V
PD Reflection (Prompt): 0.411 mW
PD Reflection (Total): 1.376 mW

PD #8
Incident: 12.63 +/- 0.01 mW
Vout: 9.0790 +/- 0.0005 V
PD Reflection (Prompt): 0.420 mW
PD Reflection (Total): 1.295 mW

PD #9
Incident: 12.67 +/- 0.02 mW
Vout: 9.2075 +/- 0.0005 V
PD Reflection (Prompt): 0.384 mW
PD Reflection (Total): 1.091 mW

PD #10
Incident: 12.70 +/- 0.01 mW
Vout: 9.0880 +/- 0.001 V
PD Reflection (Prompt): 0.414 mW
PD Reflection (Total): 1.304 mW

PD #11
Incident: 12.64 +/- 0.01 mW
Vout: 9.2861 +/- 0.0005 V
PD Reflection (Prompt): 0.416 mW
PD Reflection (Total): 1.152 mW

PD #12
Incident: 12.68 +/- 0.02 mW
Vout: 9.3650 +/- 0.001 V
PD Reflection (Prompt): 0.419 mW
PD Reflection (Total): 1.057 mW

PD #13
Incident: 12.89 +/- 0.01 mW
Vout: 9.3861 +/- 0.001 V
PD Reflection (Prompt): 0.410 mW
PD Reflection (Total): 1.047 mW

PD serial number
 1 - 0782
 2 - 1139
 3 - 0793
 4 - 0732
 5 - 0791
 6 - 0792
 7 - 0787
 8 - 0790
 9 - 0781
10 - 0784
11 - 1213
12 - 1208
13 - 1209

{
  {1, 12.82, 9.161, 0.404, 1.168},
  {2, 12.73 , 9.457, 0.364 , 0.937} ,
  {3, 12.67 , 9.1139, 0.383 , 1.272 },
  {4, 12.71 , 9.3065, 0.393 , 1.033 },
  {5, 12.69, 9.1071, 0.401 , 1.183 },
  {6, 12.65, 9.0310, 0.395 , 1.306} ,
  {7, 12.67, 9.0590, 0.411 , 1.376} ,
  {8, 12.63 , 9.0790, 0.420 , 1.295} ,
  {9, 12.67 , 9.2075, 0.384 , 1.091} ,
  {10, 12.70, 9.0880, 0.414 , 1.304 },
  {11, 12.64 , 9.2861, 0.416 , 1.152} ,
  {12, 12.68 , 9.3650, 0.419 , 1.057} ,
  {13, 12.89 , 9.3861, 0.410 , 1.047}
};

WB 18 March

• Diode test
  
  • Dark current / Dark noise / Impedance
  • Quantum Efficiency test (but with glass)
  • Diode given to Bob for cleaning
• Research possible issue of UV light on 1064 HR coating
  
  • ~ppm order loss increase after depositing 3J/cm^2 in 8 hours (i.e. same order to our illumination but in 10s for us)
  • Sent an e-mail to Ke-Xun Sun -> So far, no reply.
• Glue test of PZT+prism+curved mirror with UV bond epoxy 
  
  • Done. Found some handling issues on the fixture.
• Preparation of N2 line:
  
  • Done

Action items:

• Bake test at 100°C for 1 hour at CIT 
  
  • Will be done on 25 Mon-26 Tue at Bob's lab
• Curved mirror characterization
• R&T measurement

25 March (Mon):

Inspect the test PZT assembly

• => Give it to Bob. (done)

Glue topside components (done)

• Clean up the table for the gluing work.
• Prepare the transport fixture on the table.
• Glass breadboard
  • Pick breadboard #1 (cf. [ELOG 27])
  • Wipe the entire glass breadboard with IPA
  • Place the breadboard in the fixture (check which is the upper side)
• Gluing
  • Set the gluing template on the breadboard.
  • Place all of the glass components on the plate (just for confirmation)
  • Wipe (locally) both surfaces to be glued.
  • Apply glue on the component to be glued
  • Align the components in the template. Use the cantilever pusher if necessary.
  • Illuminate UV
  • Repeat the above process for all of the components.
• Close the transport fixture and wrap with Al foil

[Koji Jeff Zach]

AAA

BBB

CCC

DDD

Loan from PSL Lab

- 300mm mirror with Ultima mount and pedestal
- Isopropanol small glass bottleReturned on Apr 12 2013.
- Newport 422-1S single-axis stageReturned on Apr 12 2013.

Loan from ATF Lab

- 50/50 Cube BS 05BC16NP.9 without mount
- 1.5" pedestal (1/4-20 thread), 1/4" shim (1/4-20 through-hole), 1/8" shim (1/4-20 through-hole): 2 eachReturned on Aug 22, 2013.
- PBS & PBS mount
- Newport 422-1S single-axis stageReturned on Apr 12 2013.
- 10 ft BNC cable x 2
- some more BNC (labeled as ATF)Returned on May 20 2013.
- Y1-1037-45P with ultima mount 3inch post
- 1x Newfocus 5104 mirrorReturned on Aug 22, 2013.
- 4x ForkReturned on Aug 22, 2013.

Loan from 40m

- 4 BNC Ts and 1 BNC Ys
- 4 BNC Ts and 1 BNC YsReturned on May 20 2013.
- 6 BNC cablesReturned on May 20 2013.
- SONY CCD / CCD Monitor / CCD power supply
- Optical fiber tester (for fiber alignment) Returned on Apr 9 2013.

26 March (Tue):

- Curved mirror characterization (Koji, done)

- Input optics for the cavity locking (Zach)

Faraday, BB EOM, Resonant EOM, AOM, MZ

27 March (Wed)

- AOM drift investigation (Lisa, Zach)

- Cavity input optics ~ Fiber coupling (Zach)

Action Items

• Glue curved mirror sub-assys.
• R&T measurement

28 March (Thu):

• Rebuild the bottom template in the lab
• Place the bottom template on the OMC
• Glue the PZTs on the mounting prisms (x2)
• Glue the curved mirrors on the PZTs (x2)
• R&T measurement
• Placing optics on the OMC breadboard
   
• Better coupling to the fiber
• Matching to the OMC cavity

29 March (Fri):

Start gluing bottom side: Set 4 cavity mirrors and 1 HR mirror
   and try to resonate beam.  Glue when OK.

Place BS and DCPD mounting brackets.  Glue when OK.
Friday: Place QPDs and rest of optics.  Glue when OK.

WB 1 April

• Testing at CIT
  
  • Transmission / Coupling / Loss
  • FSR / TMS
  • Power dependence
  • PZT position dependence
  • Back scattering
  • Openloop TF
  • PZT TF
  • Noise measurement
• Epoxy cure bake at CIT
• Retest at CIT
  
  • ditto

WB 8 April or after

• Packing
• Shipping - Shipping box?
• Optical Testing at LLO (2 days anticipated)

[Koji, Jeff, Zach, Lisa]

We glued a test PZT-mirror assembly last week in order to make sure the heat cure of the epoxy does not make any problem
on the glass-PZT joints. The assembly was sent to Bob for the heat treatment. We received the assembly back from Bob on Wednesday.

We noticed that the assembly after the heat cure at 100degC had some voids in the epoxy layer
(looking like the fused silica surface was only 70% "wetted" by the epoxy).
The comparison of the assembly before and after the heat treatment is found in the slideshow at the bottom of the entry.

Initially our main concern was the impact to the control and noise performance.
An unexpected series resonance on the PZT transfer function and unwanted noise creation by the imperfect bonding may terribly ruin the IFO sensitivity.
In reality, after repeated poking by fingers, the PZT-prism joint was detached. This isn't good at all.
Note that there is no sign of degradation on the glass-glass joint.

We investigated the cause of this like:
- Difference of thermal expansion (3ppm/C PZT vs 0.55ppm/C fused silica)
- Insufficient curing of epoxy by UV (but this is the motivation of the heat cure)

Our resolution up to this point is to switch the glue to EP30-2. This means we will go through the heat cure test again.
Unfortunately there is no EP30-2 in stock at Caltech. We asked MIT to send us some packets of EP30-2.

Hardness of the epoxies is another concern. Through the epoxy investigation, we learned from Noliac that the glue for the PZT
should not be too hard (stiff) so as not to constrain the deformation of the PZT. EP30-2 has Shore D Hardness of 75 or more,
while Optocast UV epoxy has 88, and EPOTEK Epoxies, which Noliac suggested for gluing, has ~65. This should also be
confirmed by some measurement.  We will also ask Master Bond if they have information regarding the effect of curing
temperature on the hardness of the epoxy.  EP30-2 can be cured anywhere between RT and 200F (it's service range is up to 300F).
However, the entire breadboard, with the curved mirror sub-assemblies, will need to be baked at 110C to cure the UV Bond epoxy. 
We hope that exposure to relatively higher temps doesn't harden the EP30-2. The EP30-2 data sheet recommends an epoxy
thickness of 80-120 microns which is much thicker than we would like.

We also don't have a way tocontrol the thickness; though we could add glass spheres to the epoxy to control the thickness.
The thickness of the EP30-2 used to bond the metal wire guide prism on the core optics is much thinner at 15-25 microns.