40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  OMC elog  Not logged in ELOG logo
Message ID: 380     Entry time: Thu Sep 26 17:33:52 2019
Author: Stephen 
Type: General 
Category: General 
Subject: Dirty ABO test run prior to PZT Subassembly Bonding - ABO is Ready! 

Follow up on OMC elog 379

I was able to obtain the following (dark blue) bake profile, which I believe is adequate for our needs.

The primary change was a remounting of the thermocouple to sandwich it between two stainless steel masses. The thermocouple bead previously was 1) in air and 2) close to the oven skin.

Attachment 1: image_showing_20190924_abo_qualifying_bake.png  65 kB  Uploaded Thu Sep 26 18:55:21 2019  | Hide | Hide all
ELOG V3.1.3-