40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  OMC elog  Not logged in ELOG logo
Message ID: 158     Entry time: Tue Aug 27 17:02:31 2013
Author: Koji 
Type: Mechanics 
Category: Characterization 
Subject: Spot position measurement on the diode mounts 

After the PZT test, the curved mirrors were aligned to the cavity again.

In order to check the height of the cavity beam, the test DCPD mount was assembled with 2mm shim (D1201467-3)
The spot position was checked with a CCD camera.

According to the analysis of the picture, the spot height is about 0.71mm lower than the center of the mount.

Attachment 1: DCPD1.png  8.113 MB  | Hide | Hide all
ELOG V3.1.3-