| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
16095
|
Thu Apr 29 11:51:27 2021 |
Anchal | Summary | LSC | Start of measuring IMC WFS noise contribution in ar cavity length noise | Tried locking the arms
Ran IFO > Configure
> ! (YARM) > Restore YARM. Nothing |
|
|
16100
|
Thu Apr 29 17:43:48 2021 |
Anchal | Update | CDS | F2A Filters double check | I double checked today and the F2A filters
in the output matrices of MC1, MC2 and MC3
in the POS column are ON. I do not get what |
|
|
16101
|
Thu Apr 29 17:51:19 2021 |
Anchal | Summary | LSC | Start of measuring IMC WFS noise contribution in arm cavity length noise | t Both arms were locked simply by using
IFO > Configure > ! (YARM) > Restore
YARM. I had to use ASS to improve the TRX/TRY |
|
|
16102
|
Thu Apr 29 18:53:33 2021 |
Anchal | Update | SUS | IMC Suspension Damping Gains Test | With the input matrix, coil ouput gains
and F2A filters loaded as in 16091,
I tested the suspension loops' step response |
|
|
16110
|
Mon May 3 16:24:14 2021 |
Anchal | Update | SUS | IMC Suspension Damping Gains Test Repeated with IMC unlocked | We repeated the same test with IMC unlocked.
We had found these gains when IMC was unlocked
and their characterization needs to be done |
|
|
16113
|
Mon May 3 18:59:58 2021 |
Anchal | Summary | General | Weird gas leakagr kind of noise in 40m control room | For past few days, a weird sound of decaying
gas leakage comes in the 40m control room
from the south west corner of ceiling. Attached |
|
|
16120
|
Wed May 5 09:04:47 2021 |
Anchal | Update | SUS | New IMC Suspension Damping Gains uploaded for long term testing | We have uploaded the new damping gains
on all the suspensions of IMC. This completes
changing all the configuration to as mentioned |
|
|
16125
|
Thu May 6 16:13:39 2021 |
Anchal | Summary | IMC | Angular actuation calibration for IMC mirrors | Here's my first attempt at doing angular
actuation calibration for IMC mirrors using
the method descibed in /users/OLD/kakeru/oplev_calibration/oplev.pdf |
|
|
16139
|
Thu May 13 19:38:54 2021 |
Anchal | Update | SUS | MC1 Satellite Amplifier Debugged | [Anchal Koji]
Koji and I did a few tests with
an OSEM emulator on the satellite amplifier |
|
|
16147
|
Thu May 20 10:35:57 2021 |
Anchal | Update | SUS | IMC settings reverted | For future reference, the new settings
can be upoaded from a script in the same
directory. Run python /users/anchal/20210505_IMC_Tuned_SUS_with_Gains/uploadNewConfigIMC.py |
|
|
16168
|
Fri May 28 17:32:48 2021 |
Anchal | Summary | ALS | Single Arm Actuation Calibration with IR ALS Beat | I attempted a single arm actuation calibration
using IR beatnote (in the directions of soCal
idea for DARM calibration) |
|
|
16179
|
Thu Jun 3 17:35:31 2021 |
Anchal | Summary | IMC | Fixed medm button | I fixed the PSL shutter button on Shutters
summary page C1IOO_Mech_Shutter.adl. Now
PSL switch changes C1:PSL-PSL_ShutterRqst |
|
|
16197
|
Thu Jun 10 14:01:36 2021 |
Anchal | Summary | AUX | Xend Green Laser PDH OLTF measurement loop algebra | Attachment 1 shows the closed loop of Xend
Green laser Arm PDH lock loop. Free running
laser noise gets injected at laser head after |
|
|
16200
|
Mon Jun 14 18:57:49 2021 |
Anchal | Update | AUX | Xend is unbearably hot. Green laser is loosing lock in 10's of seconds | Working in Xend with mask on has become
unbearable. It is very hot there and I would
really like if we fix this issue. |
|
|
16214
|
Fri Jun 18 14:53:37 2021 |
Anchal | Summary | PEM | Temperature sensor network proposal | I propose we set up a temperature sensor
network as described in attachment 1.
Here there are two types of units: |
|
|
16222
|
Wed Jun 23 09:05:02 2021 |
Anchal | Update | SUS | MC lock acquired back again | MC was unable to acquire lock because the
WFS offsets were cleared to zero at some
point and because of that MC was very misaligned |
|
|
16231
|
Wed Jun 30 15:31:35 2021 |
Anchal | Summary | Optical Levers | Centered optical levers on ITMY, BS, PRM and ETMY | When both arms were locked, we found that
ITMY optical lever was very off-center. This
seems to have happened after the c1susaux |
|
|
16232
|
Wed Jun 30 18:44:11 2021 |
Anchal | Summary | LSC | Tried fixing ETMY QPD | I worked in Yend station, trying to get
the ETMY QPD to work properly. When I started,
only one (quadrant #3) of the 4 quadrants |
|
|
16236
|
Thu Jul 1 16:55:21 2021 |
Anchal | Summary | Optical Levers | Fixed Centeringoptical levers PRM | This was a mistake. When arms are locked,
PRM is misaligned by setting -800 offset
in PIT dof of PRM. The oplev is set to function |
|
|
16242
|
Fri Jul 9 15:39:08 2021 |
Anchal | Summary | ALS | Single Arm Actuation Calibration with IR ALS Beat [Correction] | I did this analysis again by just doing
demodulation go 5s time segments of the 60s
excitation signal. The major difference is |
|
|
16261
|
Tue Jul 27 23:04:37 2021 |
Anchal | Update | LSC | 40 meter party | [ian, anchal, paco]
After our second attempt of locking
PRFPMI tonight, we tried to resotre XARM |
|
|
16264
|
Wed Jul 28 17:10:24 2021 |
Anchal | Update | LSC | Schnupp asymmetry | [Anchal, Paco]
I redid the measurement of Schnupp
asymmetry today and found it to be 3.8 cm |
|
|
16268
|
Tue Aug 3 20:20:08 2021 |
Anchal | Update | Optical Levers | Recentered ETMX, ITMX and ETMY oplevs at good state | Late elog. Original time 08/02/2021 21:00.
I locked both arms and ran ASS
to reach to optimum alignment. ETMY PIT > |
|
|
16270
|
Thu Aug 5 14:59:31 2021 |
Anchal | Update | General | Added temperature sensors at Yend and Vertex too | I've added the other two temperature
sensor modules on Y end (on 1Y4, IP: 192.168.113.241)
and in the vertex on (1X2, IP: 192.168.113.242). |
|
|
16271
|
Fri Aug 6 13:13:28 2021 |
Anchal | Update | BHD | c1teststand subnetwork now accessible remotely | c1teststand subnetwork is now accessible
remotely. To log into this network, one needs
to do following: |
|
|
16273
|
Mon Aug 9 10:38:48 2021 |
Anchal | Update | BHD | c1teststand subnetwork now accessible remotely | I had to add following two lines in the
/etc/network/interface file to make the special
ip routes persistent even after reboot: |
|
|
16282
|
Wed Aug 18 20:30:12 2021 |
Anchal | Update | ASS | Fixed runASS scripts | Late elog:
Original time of work Tue Aug 17 20:30 2021
I locked the arms yesterday |
|
|
16283
|
Thu Aug 19 03:23:00 2021 |
Anchal | Update | CDS | Time synchornization not running | I tried to read a bit and understand the
NTP synchronization implementation in FE
computers. I'm quite sure that NTP synchronization |
|
|
16285
|
Fri Aug 20 00:28:55 2021 |
Anchal | Update | CDS | Time synchornization not running | I added ntpserver as a known host name
for address 192.168.113.201 (fb1's address
where ntp server is running) in the martian |
|
|
16286
|
Fri Aug 20 06:24:18 2021 |
Anchal | Update | CDS | Time synchornization not running | I read on some stack exchange that 'NTP
synchornized' indicator turns 'yes'
in the output of command timedatectl only |
|
|
16291
|
Mon Aug 23 22:51:44 2021 |
Anchal | Update | General | Time synchronization efforts | Related elog thread: 16286
I didn't really achieve
anything but I'm listing what I've |
|
|
16292
|
Tue Aug 24 09:22:48 2021 |
Anchal | Update | General | Time synchronization working now | Jamie told me to use chroot to log in into
the chroot jail of debian os that are exported
for the FEs and install ntp there. I took |
|
|
16295
|
Tue Aug 24 22:37:40 2021 |
Anchal | Update | General | Time synchronization not really working | I attempted to install chrony and run it
on one of the FE machines. It didn't
work and in doing so, I lost the working |
|
|
16322
|
Mon Sep 13 15:14:36 2021 |
Anchal | Update | LSC | Xend Green laser injection mirrors M1 and M2 not responsive | I was showing some green laser locking
to Tega, I noticed that changing the PZT
sliders of M1/M2 angular position on Xend |
|
|
16330
|
Tue Sep 14 17:22:21 2021 |
Anchal | Update | CDS | Added temp sensor channels to DAQ list | [Tega, Paco, Anchal]
We attempted to reboot fb1 daqd
today to get the new temperature sensor channels |
|
|
16337
|
Thu Sep 16 10:07:25 2021 |
Anchal | Update | General | Melting 2 | Put outside.
|
|
|
16340
|
Thu Sep 16 20:18:13 2021 |
Anchal | Update | General | Reset | Fridge brought back inside.
|
|
|
16351
|
Tue Sep 21 11:09:34 2021 |
Anchal | Summary | CDS | XARM YARM UGF Servo and Oscillators added | I've updated the c1LSC simulink model
to add the so-called UGF servos in the XARM
and YARM single arm loops as well. These |
|
|
16354
|
Wed Sep 22 12:40:04 2021 |
Anchal | Summary | CDS | XARM YARM UGF Servo and Oscillators shifted to OAF | To reduce burden on c1lsc, I've shifted
the added UGF block to to c1oaf model. c1lsc
had to be modified to allow addition of an |
|
|
16365
|
Wed Sep 29 17:10:09 2021 |
Anchal | Summary | CDS | c1teststand problems summary | [anchal, ian]
We went and collected some information
for the overlords to fix the c1teststand |
|
|
16367
|
Thu Sep 30 14:09:37 2021 |
Anchal | Summary | CDS | New way to ssh into c1teststand | Late elog, original time
Wed Sep 29 14:09:59 2021
We opened a new port (22220) in |
|
|
16368
|
Thu Sep 30 14:13:18 2021 |
Anchal | Update | LSC | HV supply to Xend Green laser injection mirrors M1 and M2 PZT restored | Late elog, original date Sep 15th
We found that the power switch
of HV supply that powers the PZT drivers |
|
|
16372
|
Mon Oct 4 11:05:44 2021 |
Anchal | Summary | CDS | c1teststand problems summary | [Anchal, Paco]
We tried to fix the ntp synchronization
in c1teststand today by repeating the steps |
|
|
16381
|
Tue Oct 5 17:58:52 2021 |
Anchal | Summary | CDS | c1teststand problems summary | open-mx service is running successfully
on the fb1(clone), c1bhd and c1sus.
|
|
|
16382
|
Tue Oct 5 18:00:53 2021 |
Anchal | Summary | CDS | c1teststand time synchronization working now | Today I got a new router that I used to
connect the c1teststand, fb1 and chiara.
I was able to see internet access in c1teststand |
|
|
16385
|
Wed Oct 6 15:39:29 2021 |
Anchal | Summary | SUS | PRM and BS Angular Actuation transfer function magnitude measurements | Note that your tests were done with the
output matrix for BS and PRM in the compensated
state as done in 40m/16374. |
|
|
16391
|
Mon Oct 11 17:31:25 2021 |
Anchal | Summary | CDS | Fixed mounting of mx devices in fb. daqd_dc is running now. |
|
|
|
16392
|
Mon Oct 11 18:29:35 2021 |
Anchal | Summary | CDS | Moving forward? | The teststand has some non-trivial issue
with Myrinet card (either software or hardware)
which even teh experts are saying they don't |
|
|
16395
|
Tue Oct 12 17:10:56 2021 |
Anchal | Summary | CDS | Some more information | Chris pointed out some information displaying
scripts, that show if the DAQ network is
working or not. I thought it would be nice |
|
|
16396
|
Tue Oct 12 17:20:12 2021 |
Anchal | Summary | CDS | Connected c1sus2 to martian network | I connected c1sus2 to the martian network
by splitting the c1sim connection with a
5-way switch. I also ran another ethernet |
|