| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
1148
|
Wed Nov 19 18:12:35 2008 |
rana | Configuration | IOO | new channel for MC drum modes | I set up the lockin to take the MC Demod Board's
Qmon signal, demodulate it at 27.5 kHz, and
put the output into a DAQ channel (I think |
|
|
1158
|
Sat Nov 22 10:55:51 2008 |
Caryn | Configuration | IOO | Drum modes Lock-In settings changed | I unhooked the MC Demod Board's Qmon signal
from the Lock-In. Set the demodulation frequency
to 31.11Hz with 1V amplitude, and
|
|
|
1159
|
Mon Nov 24 16:43:34 2008 |
rana | Configuration | Computers | Alex and Jay took away some computers from the racks | I was over at Wilson house and saw Jay and
Alex bring in 3 rackmount computers. One
was a Sun 4600 and
|
|
|
1161
|
Mon Nov 24 19:15:16 2008 |
rana, alberto, john | Configuration | Environment | temperature | The PSL Room Temperature was alarming because
it had gone above 23 C. This set off an unfortunate
chain of events:
|
|
|
1163
|
Tue Nov 25 19:29:15 2008 |
rana, alberto, john | Configuration | Environment | temperature | [quote]The PSL Room Temperature was alarming
because it had gone above 23 C. This set
off an unfortunate chain of events:
|
|
|
1164
|
Thu Nov 27 22:56:42 2008 |
rana | Configuration | Environment | temperature | 8-) |
|
|
1166
|
Tue Dec 2 17:56:56 2008 |
Alberto, Rana | Configuration | PSL | MC Alignment | In the attempt to maximize the Mode Cleaner
transmission and minimize the reflection
from the steering mirrors of the MC periscope, |
|
|
1171
|
Wed Dec 3 19:21:09 2008 |
rana | Configuration | PEM | Ranger move | I looked at the Ranger signals. [B]Somehow
it has a relative transfer function of 'f'
between it and the Guralp.[/B]
|
|
|
1175
|
Thu Dec 4 16:29:20 2008 |
josephb | Configuration | Computers | Error message on Frame Builder Raid Array | The Fibrenetix FX-606-U4 RAID connected to
the frame builder in 1Y7 is showing the following
error message: IDE Channel #4 Error Reading |
|
|
1177
|
Fri Dec 5 01:41:33 2008 |
Yoichi | Configuration | Computers | MEDM screen snapshot now works on linux machines | As a part of my "make everything work on linux"
project, I modified 'updatesnap' script so
that linux machines can update MEDM screen |
|
|
1178
|
Fri Dec 5 01:58:58 2008 |
Yoichi | Configuration | ASC | tdscntr.pl now works at 40m | Tobin gave me the perl version of tdscntr
some time ago.
Pinkesh and I modified and tested it at LHO.
|
|
|
1192
|
Thu Dec 18 12:52:00 2008 |
Alberto | Configuration | SUS | Mode Cleaner Cavity Alignment | This morning I found the MC locked to the
10 mode. When I locked it on the 00 mode,
it was unstable and eventually it always |
|
|
1193
|
Thu Dec 18 19:15:54 2008 |
Alberto, Yoichi | Configuration | SUS | Mode Cleaner Cavity Alignment | [quote]This morning I found the MC locked
to the 10 mode. When I locked it on the 00
mode, it was unstable and eventually it always |
|
|
1194
|
Fri Dec 19 11:18:52 2008 |
Alberto | Configuration | General | Mode Cleaner Temperature Monitor | I reduced from 10 to 5 the gain of the SR560
that Caryn has set up after the lock-in amplifier
nest to the PSL rack because the overload |
|
|
1195
|
Fri Dec 19 11:29:16 2008 |
Alberto, Yoichi | Configuration | MZ | MZ Trans PD | Lately, it seems that the matching of the
input beam to the Mode Cleaner has changed.
Also, it is drifting such that it has become |
|
|
1207
|
Mon Dec 29 21:51:02 2008 |
Yoichi | Configuration | Computers | Web server on nodus | The apache on nodus has been solely serving
for the svn web access.
I changed the configuration and all files |
|
|
1208
|
Tue Dec 30 18:51:18 2008 |
rana,yoichi | Configuration | Electronics | Illuminator Power Supply reset | [COLOR=blue][B]We noticed that none of the
illuminators were working.[/B][/COLOR]
|
|
|
1217
|
Thu Jan 8 16:49:37 2009 |
rana | Configuration | lore | HP 5550dtn (Grazia) set up on allegra | [quote]I set up printing to grazia from allegra.
The CUPS interface was not as straightforward
as Tobin had made it seem in the Wiki. I |
|
|
1224
|
Tue Jan 13 11:10:42 2009 |
rob | Configuration | Computers | conlogger restarted | unknown how long it's been down. |
|
|
1230
|
Thu Jan 15 22:30:32 2009 |
rana | Configuration | DMF | DMF start script | I tried to restart the DMF using the start_all
script: http://dziban.ligo.caltech.edu:40/40m/280
|
|
|
1232
|
Fri Jan 16 11:33:59 2009 |
rob | Configuration | DMF | DMF start script | [quote]I tried to restart the DMF using the
start_all script: http://dziban.ligo.caltech.edu:40/40m/280
|
|
|
1236
|
Fri Jan 16 18:45:20 2009 |
Yoichi | Configuration | IOO | MC_L gain increased by a factor of 2 | Rana, Yoichi
Since we fixed the FSS AOM double-pass, which |
|
|
1244
|
Thu Jan 22 11:54:09 2009 |
Alberto | Configuration | PSL | Mach Zehnder Output Beam QPD | I rotated by 180 degrees the 10% beam splitter
that it is used to fold the beam coming from
the Mach Zehnder (directed to the MC) on |
|
|
1252
|
Sat Jan 24 11:50:24 2009 |
Alberto | Configuration | Electronics | Photodiode Filters' Transfer Functions | I found an elog entry by Jenne with the measurement
of the transfer functions of the filters
of some of our photodetectors. Since it might |
|
|
1253
|
Mon Jan 26 14:51:54 2009 |
josephb | Configuration | VAC | | We need a new RS-232 to Ethernet bridge in
order to interface properly with the new
RGA. The RGA has a fixed baud rate of 28.8k, |
|
|
1258
|
Thu Jan 29 16:50:53 2009 |
josephb, alberto | Configuration | Computers | Megatron fixed | The warning light on megatron and the fans
at full speed were fixed by not just power
cycling, but completely unplugging megatron |
|
|
1261
|
Fri Jan 30 17:30:31 2009 |
Alberto, Josephb | Configuration | Computers | New computer Ottavia set up | Alberto, Joseph,
Today we installed the computer that some |
|
|
1263
|
Mon Feb 2 12:35:22 2009 |
Alberto | Configuration | General | New Elog 2.7.5 in Service on Nodus | I moved the 40m, the Adhikari Lab and the
SUS elogs from Dziban (located in Millikan's
6th floor) to our gateway server Nodus. In |
|
|
1264
|
Mon Feb 2 17:25:44 2009 |
Alberto | Configuration | General | Some little problem with the new elog | For some reason the new elog does not look
exactly like it should.
1) Some of the
editing features are not available.
2) |
|
|
1265
|
Mon Feb 2 18:32:54 2009 |
Alberto | Configuration | General | Some little problem with the new elog |
|
|
|
1266
|
Mon Feb 2 18:51:02 2009 |
Alberto | Configuration | General | New Elog 2.7.5 in Service on Nodus |
|
|
|
1287
|
Mon Feb 9 19:50:48 2009 |
Yoichi | Configuration | PSL | ISS disconnected | We are doing measurements on ISS.
The ISS feedback connector is disconnected
and the beam to the MC is blocked. |
|
|
1292
|
Wed Feb 11 10:52:22 2009 |
Yoichi | Configuration | DAQ | C1:PEM-OSA_APTEMP and C1:PEM-OSA_SPTEMP disconnected | During the cleanup of the lab. Steve found
a box with two BNCs going to the ICS DAQ
interface and an unconnected D-SUB on the |
|
|
1293
|
Wed Feb 11 11:39:17 2009 |
steve | Configuration | General | vac envelope ground | The vacuum envelope was grounded from
the IOO chamber to master ground north (under
electric breaker panel L)
with |
|
|
1294
|
Wed Feb 11 15:01:47 2009 |
josephb | Configuration | Computers | Allegra | So after having broke Allegra by updating
the kernel, I was able to get it running
again by copying the xorg.conf.backup file |
|
|
1299
|
Thu Feb 12 18:35:10 2009 |
Kakeru | Configuration | PSL | PA current limitter |
I added a PA current limiter.
It is only a voltage devider (composed |
|
|
1302
|
Fri Feb 13 16:30:49 2009 |
steve | Configuration | General | status quo is disturbed | I have been getting ready for the annual
safety inspection in the past 2-3 days.
Meaning cleaning up and disturbing |
|
|
1303
|
Sat Feb 14 16:15:19 2009 |
rob | Configuration | Computers | c1susvme1 | c1susvme1 is behaving weirdly. I've
restarted it several times but its computation
time is hanging out around 260 usec, making |
|
|
1312
|
Mon Feb 16 20:47:48 2009 |
rana | Configuration | IOO | Mode Cleaner WFS Loop Gain change | I found the MCWFS gain slider down at 0.012.
In this state the UGFs are probably around
10-30 mHz
|
|
|
1314
|
Mon Feb 16 22:58:51 2009 |
rana, yoichi | Configuration | SUS | Hysteresis in SUS from Misalignments | WE wondered if there was some hysteresis in
the SUS alignments. When we leave the optics
misaligned for a
|
|
|
1320
|
Wed Feb 18 19:13:20 2009 |
rana | Configuration | Computers | SVN & MEDM & old medm files | Allegra had a 2 year old version of SVN installed
and CentOS (yum) couldn't upgrade it, so
I did an 'svn remove subversion'
|
|
|
1333
|
Mon Feb 23 16:42:08 2009 |
josephb | Configuration | Cameras | Camera Beta Testing | I've setup the GC650 camera (ID 32223)
to look at the mode cleaner transmission.
I've also added an alias to the camera server |
|
|
1340
|
Thu Feb 26 19:20:08 2009 |
Yoichi | Configuration | General | ETMX camera centered. POX, POY PDs centered | Alberto, Yoichi
We centered the ETMX camera.
|
|
|
1345
|
Mon Mar 2 16:27:40 2009 |
Alberto | Configuration | Electronics | MC Drum Mode SR560 Preamplifier Replaced | Today I checked out the SR560 around the
lab. I confirmed that the one with the label
"channel A noisy" is effectively |
|
|
1356
|
Wed Mar 4 17:59:14 2009 |
Yoichi | Configuration | Computers | ezca tools and tds tools work around | Some of ezca commands and tds commands sporadically
fail with a segmentation fault on linux machines.
As far as I know, ezcawrite, ezcastep, ezcaswitch, |
|
|
1357
|
Wed Mar 4 23:42:45 2009 |
rana | Configuration | PSL | psl db change | I made |
|
|
1360
|
Thu Mar 5 02:24:19 2009 |
rana | Configuration | Computers | yum.repos.d | I added the following repos which
I found on allegra to megatron and then did
a 'yum install sshfs' on both machines: |
|
|
1362
|
Thu Mar 5 23:18:38 2009 |
Kakeru | Configuration | Computers | tdsdata doesn't work | I found that tdsdata doesn't work.
When I star tdsdata, he takes a few ~ 10 |
|
|
1363
|
Fri Mar 6 01:04:49 2009 |
Kiwamu IZUMI | Configuration | IOO | !! lock-in amp disconnected !! | The power supply of a lock-in amp, which
is on the Y-arm side of PSL clean room, was
pulled out by my mistake. |
|
|
1368
|
Fri Mar 6 18:26:37 2009 |
Yoichi | Configuration | Computers | ezca tools and tds tools work around | I updated the wrapper scripts so that they
do not retry more than 6 times.
Otherwise, the wrapper scripts loop over |
|