40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log, Page 327 of 344  Not logged in ELOG logo
ID Date Author Typedown Category Subject Text Attachments
  2208   Mon Nov 9 11:11:19 2009 AlbertoConfigurationLSCMC2 Watchdogs trippedThe MC2 watchdogs tripped. I just restored
them.
I also had to relock the MZ and then
  
  2211   Mon Nov 9 13:17:07 2009 AlbertoConfigurationABSLNPRO onI turned the auxialiary NPRO for the AbsL
Experiment on. Its shutter stays closed.
  
  2227   Tue Nov 10 17:01:33 2009 AlbertoConfigurationIOOc1ioovme and c1iool0 rebooted This afternoon, while I was trying to add
the StochMon channels to the frames, I rebooted
the c1ioovme and c1iool0.
  
  2259   Thu Nov 12 17:24:29 2009 Koji, Joe, PeterConfigurationCDSETMY CDS test startedWe started the test of the new CDS system
at ETMY.
The plan is as follows:
  
  2265   Fri Nov 13 09:54:14 2009 josephbConfigurationComputersMegatron switched to tcshI've changed megatron's controls account
default shell to tcsh (like it was before). 
It now sources cshrc.40m in /cvs/cds/caltech/
  
  2275   Mon Nov 16 15:58:02 2009 josephbConfigurationGeneralAdded Gige camera to AP table, added some screensI placed a GC750 gige camera looking at
a pickoff of the AS port, basically next
to the analog camera, on the AP table.
  
  2276   Mon Nov 16 17:24:28 2009 josephbConfigurationComputersCamera medm functionality improvedCurrently the Camera medm screen (now available
from the sitemap), includes a server and
client script buttons.  The server has
  
  2280   Tue Nov 17 11:09:43 2009 KojiConfigurationSUSETMY suspension conencted to megatron ADC/DACI have connected ETMY sus electronics to
megatron ADC/DAC.
We continue this state until 15:00
  
  2281   Tue Nov 17 13:39:37 2009 KojiConfigurationSUSETMY suspension conencted to megatron ADC/DAC0) Now the connection for the ETMY suspension
was restored in a usual state. It damps
well.
  
  2282   Tue Nov 17 15:23:06 2009 KojiConfigurationSUSETMY suspension conencted to megatron ADC/DACOK.
Now, Timing/ADC/DAC are working. It's almost
there.
1) As a temporaly
  
  2285   Tue Nov 17 21:10:30 2009 KojiConfigurationSUSETMY suspension conencted to megatron ADC/DACKoji, Rana
The megatron DAC was temporaly connected
to the suspension electronics for the DAC
  
  2290   Wed Nov 18 11:27:33 2009 Koji, josephbConfigurationSUSETMY suspension conencted to megatron ADC/DAC

    
        
  
  2291   Wed Nov 18 12:33:30 2009 Koji, josephbConfigurationSUSETMY suspension conencted to megatron ADC/DACHurraaaah!
We've got the damping of the suspension.
The Oplev loops has also worked!
The
 Untitled.png 
  2293   Wed Nov 18 16:24:25 2009 peteConfigurationSUSETMY suspension conencted to megatron ADC/DAC/cvs/cds/caltech/target/fb/daqd -c daqdrc
This starts the FB.
Now the dataviewer and DTT work!
  
  2301   Thu Nov 19 11:33:15 2009 josephbConfigurationComputersMegatron I tried rebooting megatron, to see if that
might help, but everything still acts the
same. 
  
  2302   Thu Nov 19 16:04:48 2009 AlbertoConfigurationelogElog debugging output - Down time programmed today to make changesWe want the elog process to run in verbose
mode so that we can see what's going. The
idea is to track the events that trigger
  
  2303   Thu Nov 19 18:49:55 2009 AlbertoConfigurationelogElog debugging output - Down time programmed today to make changes

    
        
  
  2305   Fri Nov 20 11:01:58 2009 josephb, alexConfigurationComputersWhere to find RFM offsetsAlex checked out the old rts (which he
is no longer sure how to compile) from CVS
to megatron, to the directory:
  
  2306   Fri Nov 20 11:14:22 2009 josephb, alexConfigurationComputerstest points working on megatron and we may have filters with switch outputs built inAlex tooked at the channel definitions
(can be seen in tpchn_C1.par), and noticed
the rmid was 0. 
  
  2309   Fri Nov 20 16:18:56 2009 robConfigurationSUSwatchdog rampdownI've changed the watchdog rampdown script
so it brings the SUS watchdogs to 220, instead
of the 150 it previously targeted. 
  
  2323   Tue Nov 24 18:24:54 2009 SanjitConfigurationAdaptive FilteringASS channels added to framebuilder 
[Sanjit, Jenne, Rob, Joe]
 
  
  2384   Thu Dec 10 13:10:25 2009 AlbertoConfigurationLSC166 LO DisconnectedI temporarily disconnected the Heliax cable
that brings the 166MHz LO to the LSC rack.
I'm doing a couple of measurement
  
  2389   Thu Dec 10 17:05:21 2009 AlbertoConfigurationLSC166 MHz LO SMA-to-Heliax connection repairedI replaced the SMA end connector for the
166 MHZ Local Oscillator signal that goes
to the back of the flange in the 1Y2 rack.
  
  2393   Thu Dec 10 18:31:44 2009 AlbertoConfigurationLSC166 LO Disconnected


   
        
            
  
  2394   Fri Dec 11 08:35:04 2009 steveConfigurationVACpumpdown has startedOplev positions before and after drag wiped
arm TMs as of yesterday. Slow-mode pumpdown
has started with 3/4 turn opened  RV1
 wiping.jpg 
  2395   Fri Dec 11 09:30:09 2009 KojiConfigurationLSC166 LO DisconnectedThey
must not be dBm, must be dB 

  
  2396   Fri Dec 11 11:42:26 2009 AlbertoConfigurationLSC166 LO Disconnected


   
        
            
  
  2397   Fri Dec 11 13:18:17 2009 AlbertoConfigurationVACpumpdown has started


   
        
            
  
  2398   Fri Dec 11 14:12:32 2009 ranaConfigurationLSC166 LO Disconnected 
 Seems like very strange cable
loss numbers. The Heliax is lossier than
  
  2399   Fri Dec 11 14:19:22 2009 KojiConfigurationVACpumpdown has startedWait,
Wait, Wait.
  
  2400   Fri Dec 11 15:21:40 2009 steveConfigurationVACpumpdown#67 is completed

    
        
 pd7h.jpgoplevpd8h.jpg 
  2402   Fri Dec 11 19:51:13 2009 AlbertoConfigurationLSC166 LO Disconnected


   
        
            
  
  2432   Sat Dec 19 14:33:25 2009 KojiConfigurationComputersPDFlib lite / gnuplot 4.2.6 on Rosalba/AllegraIn order to enable 'set terminal pdf' in
gnuplot on Rosalba/Allegra, I installed PDFlib
lite and gnuplot v4.2.6. to them. 
  
  2447   Tue Dec 22 18:42:40 2009 Sanjit, KojiConfigurationAdaptive FilteringReadded DAQ channels to active listSometimes back we modified /cvs/cds/caltech/chans/daq/C1ASS.ini
to save some of the channels. The file was
reverted to default after the recent changes
  
  2469   Wed Dec 30 20:33:36 2009 rana, albertoConfigurationCamerasITMY & MC2 Camera workWe
restored the good state of the ITMY camera
 DSC_1064.JPGDSC_1065.JPGDSC_1066.JPG 
  2471   Sun Jan 3 08:23:39 2010 ranaConfigurationCDSautoburt.pl 'fixed' for post 2009 yearsTobin & Keith pointed out in the
LLO
ilog that there was a code bug
  
  2472   Mon Jan 4 09:52:40 2010 ranaConfigurationCamerasITMX camera and PSL channelsI
fixed up the ITMX camera like we did for
ITMY recently (removed T's and added strain
  
  2473   Mon Jan 4 17:21:30 2010 JenneConfigurationIOOElusive Mode Matching Solution found!I think I have
finally found a Mode Matching solution for
 Awesome_MM_Solution.png 
  2481   Wed Jan 6 03:44:41 2010 KojiConfigurationIOOElusive Mode Matching Solution found!I
am in the way to get a reasonable optical
layout.
  
  2490   Fri Jan 8 20:13:49 2010 Alberto, JoBConfigurationComputersThe 40m Kaiser Permanent Reboot MarathonThis morning after Alex and Jo's tinkering
with Megatron the RFM network crashed and
it brought down also some computers. The
 pasadena_marathon.JPG 
  2518   Sun Jan 17 05:22:42 2010 ranaConfigurationComputersELOG script changeWith Dave Barker's help, I changed the
elog startup script. Instead of running as
a Daemon with the -D option,
  
  2549   Tue Jan 26 20:18:32 2010 ranaConfigurationALARMop540m: alarms and BLRMS and StripTool restoredI turned the StripTool and ALARMS and BLRMS
back on on op540m. Looks like it has been
rebooted 5 days ago and no one turned these
  
  2551   Thu Jan 28 09:14:51 2010 AlbertoConfigurationComputersc1iscey, c1iscex, c1lsc, c1asc rebootedThis morning the LSC scripts wheren't running
properly. I had to reboot c1iscey, c1iscex,
c1lsc, c1asc .
  
  2568   Wed Feb 3 11:13:15 2010 steveConfigurationGeneralplaned power outage for Sat. Feb 20The electrical shop has to connect the
new power transformer at CES. This means
we will have no AC power for ~8 hrs on Saturday,
  
  2573   Fri Feb 5 11:01:49 2010 steveConfigurationVACslow pumpdown valve I have installed a slow start throttle
valve in front of V3  This spring loaded
valve will cut down on the flow at high pressures.
 slow.JPG 
  2585   Wed Feb 10 16:27:47 2010 steveConfigurationGeneral IFO beam heightsIN
VACUUM beam heights are ALL 5.5" 
This is measured from the top of the
  
  2589   Thu Feb 11 15:53:59 2010 steveConfigurationVACPSL output shutter is closedJoe and Alex are working on the computers.
Our vacuum system is temporary "All
off" condition: meaning all valves are
  
  2592   Thu Feb 11 18:53:57 2010 steveConfigurationVACVAC NORMAL is back

    
        
  
  2605   Tue Feb 16 10:01:16 2010 AlbertoConfigurationLSCArms and PRC not lockingSince last Friday either the arms or the
PRC can't lock.
The montors show the beam flashing
  
  2607   Tue Feb 16 14:10:06 2010 josephb, rob, kojiConfigurationLSCArms and PRC not locking

    
        
  
ELOG V3.1.3-