ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
5011
|
Thu Jul 21 10:08:30 2011 |
steve | Update | SUS | sus sensor summary | OSEM voltages to be corrected at upcoming
vent: threshold ~ 0.7-1.2V, ( at 22 out of
50 ) |
|
5010
|
Thu Jul 21 09:04:59 2011 |
valera, steve | Update | SUS | oplev gains were not optimized |
Hi Steve,
I did |
|
5009
|
Wed Jul 20 23:31:44 2011 |
Suresh | Update | IOO | MC Trans QPD is down |
The
mode cleaner is not locking because |
|
5008
|
Wed Jul 20 22:16:27 2011 |
Ishwita, Manuel | Update | Electronics | lying seismometer cable and plugging it | We laid the cable along the cable keeper
from the BACARDI seismometer to the rack
1X6, the excess cable has been coiled under |
|
5007
|
Wed Jul 20 20:44:56 2011 |
Jamie | Update | SUS | All sus models rebuilt and restarted | There were a couple of recent improvements
to the sus_single_control model that had
not been propagated to all of the suspension |
|
5006
|
Wed Jul 20 20:04:54 2011 |
Jamie | Update | CDS | C1:DAQ-FB0_C1XXX_STATUS sometimes unexplainably goes red | I have been noticing this happening occasionally,
but I don't understand what is causing:
|
|
5005
|
Wed Jul 20 19:48:03 2011 |
Jamie | Update | SUS | Re: oplev gains today |
We have been modifying models
that need to have their channels renamed |
|
5004
|
Wed Jul 20 19:24:12 2011 |
rana | Update | SUS | oplev gains today | I guess Valera forgot to elog it. Steve,
please email him and get the info.
I started to check out the OL servos |
 |
5003
|
Wed Jul 20 18:44:54 2011 |
Koji | Summary | SUS | Weekly Summary | Find Frank and ask him about those components. |
|
5002
|
Wed Jul 20 17:43:33 2011 |
suresh | Update | Computers | restarted the frame builder | I restarted the frame builder in the last
15mins.
I was making a change to a DAC channel |
|
5001
|
Wed Jul 20 14:42:34 2011 |
steve | Update | SUS | oplev gains today | C1:SUS-ETMX_OLPIT_GAIN set to 1.0
OLYAW 1.0
|
|
5000
|
Wed Jul 20 12:05:08 2011 |
Nicole | Summary | SUS | Weekly Summary | Since last week
Wednesday, I have since found a Pomona Electronics |
  |
4999
|
Wed Jul 20 11:42:47 2011 |
Ishwita, Manuel | Update | | Weekly summary |
We gave a white-board presentation
on derivation of formula for optimum Wiener
filter coefficients and wrote a latex document |
|
4998
|
Wed Jul 20 11:13:59 2011 |
Larisa Thorne | Update | elog | I restarted the ELOG as it seemed to have crashed |
|
|
4997
|
Wed Jul 20 10:10:19 2011 |
Sonali | Update | Green Locking | Weekly summary | I finished wih the set-up at the
ETMY table. Instead of the neutral Density
Filter , I put in a mirror(Y1-1037-45S) which |
|
4996
|
Wed Jul 20 06:52:01 2011 |
Suresh | Update | LSC | ABSL - PSL beat lock | The ABSL locking setup to the PSL is down.
According
the plan, I started to use the IR beam dumped
after the doubling crystal for the IR beat |
|
4995
|
Wed Jul 20 06:36:39 2011 |
Suresh | Update | IOO | WFS1 and 2 gains | Gains of individual quadrants in both
the WFS
As a simple check of the
gains on all the quadrants I hooked up the |
 |
4994
|
Wed Jul 20 06:17:04 2011 |
Suresh | Update | Green Locking | Y-end green laser power issues | The Y-end green beam power is 0.47 mW.
While
aligning the Y-end aux laser light into the
fiber we noticed that the green power out |
 |
4993
|
Tue Jul 19 23:39:11 2011 |
Jamie, Jenne | Update | LSC | Major overhaul of LSC rack; binary switching of whitening filters now working | Yesterday we started going through the
LSC binary whitening switching to make sure
the new switching control in the LSC model |
|
4992
|
Tue Jul 19 21:05:55 2011 |
haixing | Update | DAQ | choose the right relay | Rana and I are working on the AA/AI circuit
for Cymac. We need relays to bypass certain
paths in the circuit, and we just found a |
|
4991
|
Tue Jul 19 20:36:08 2011 |
rana | Update | Computers | VirtualBox + Windows 7 on rossa | I installed Virtual Box on rossa. Then
I put Windows 7 in there and am now installing
Altium. |
|
4990
|
Tue Jul 19 13:45:22 2011 |
Suresh | Update | SAFETY | Painful Voltage Regulator and Circuit-Testing Lessons | There is should be a few IDC connectors
in the lab (and some ribbon cable) using
which you can proceed with the testing of |
|
4989
|
Tue Jul 19 10:54:14 2011 |
steve | Update | General | large sensor card can not be found | Please return sensor card to laser
log box so others can use it. We have only
one larger fluorescent sensor card. |
|
4988
|
Tue Jul 19 10:18:24 2011 |
rana | Update | LSC | Big ol' mess | Remember, as per our
marker board conversation, that the resistor
noise as excitation method only works if |
|
4987
|
Tue Jul 19 09:19:14 2011 |
steve | Update | SUS | PRM damping restored | The PRM watchdogs were tripped. The side
was kicked up to 180mV Damping was restored. |
|
4986
|
Mon Jul 18 22:26:43 2011 |
Nicole | Update | SAFETY | Painful Voltage Regulator and Circuit-Testing Lessons | Today I learned
some important circuit-building lessons while |
 |
4985
|
Mon Jul 18 21:06:32 2011 |
PSL Table Guardian | Omnistructure | PSL | Don't leave the PSL table open, unattended!!!!!!!!!!!!11111 | I found the
PSL table left open, and unattended again. |
|
4984
|
Mon Jul 18 20:59:19 2011 |
Jenne | Update | LSC | Big ol' mess | [Jamie, Jenne]
We decided to take on the deceptively
easy-sounding task of checking that the LSC |
|
4983
|
Mon Jul 18 15:51:04 2011 |
steve | Update | SUS | ETMY spectra of oplev error signal | |
|
4982
|
Mon Jul 18 14:39:53 2011 |
Jenne | Update | Computers | LSC PD chans acquired | There's too much tromping around, so I'm
not going to actually measure PRC length
right now, but I did set some channels to |
|
4981
|
Mon Jul 18 10:24:48 2011 |
steve | HowTo | General | solvent bottles for cleaning optics | Each bottle has matched seals. They are
not interchangeable.
It is critical that the solvent do |
|
4980
|
Sun Jul 17 18:23:23 2011 |
Jenne | Update | PSL | Found the PMC unlocked | It was unlocked since ~4:30am. No
idea why. It's relocked so I can try
round N of measuring the PRC length. |
|
4979
|
Sat Jul 16 18:54:05 2011 |
Ishwita, Manuel | Configuration | Electronics | AA board | We fixed the anti-aliasing board in its
aluminum black box, the box couldn't
be covered entirely because of the outgoing |
  |
4978
|
Fri Jul 15 19:00:18 2011 |
dmass | Metaphysics | elog | Crashes | Elog crashed a couple times, restarted
it a couple times. |
|
4977
|
Fri Jul 15 17:42:21 2011 |
Sonali | Update | Green Locking | PSL layout for superposition of the PSL,ETMX and ETMY beams. | The fibres carrying the beams from the
ETMX as well as the ETMY have been routed
to the PSL table now. |
 |
4976
|
Fri Jul 15 16:14:00 2011 |
steve | Update | SUS | BS oplev error signal spectra | |
|
4975
|
Fri Jul 15 14:29:30 2011 |
Nicole | Summary | SUS | Photosensor Head Lessons |
You |
|
4974
|
Fri Jul 15 14:23:30 2011 |
Nicole | Summary | SUS | Photosensor Head Lessons |
Ah! I see! Thank |
|
4973
|
Fri Jul 15 13:48:56 2011 |
sonali | Update | Green Locking | Power of the AUX laser increased. |
|
|
4972
|
Fri Jul 15 09:25:02 2011 |
rana | Update | SUS | SUS oplev spectras | In addition to the OL quadrants, you need
to plot the OPLEV_PERROR and OPLEV_YERROR
signals since these are the real signals |
|
4971
|
Fri Jul 15 08:48:36 2011 |
Jamie | Summary | SUS | Photosensor Head Lessons | Nicole: I thought we had decided to use
teflon as the insulator between the PCB (yellow)
and the LED/PDs? I don't think you |
|
4970
|
Fri Jul 15 01:11:21 2011 |
Koji | Summary | SUS | Photosensor Head Lessons | Rotate the PDs and the LED so that you
can put them as close as possible.
This is to increase the sensitivity |
|
4969
|
Thu Jul 14 20:24:32 2011 |
Nicole | Summary | SUS | Photosensor Head Lessons | Today I tested
the photosensor head combination (2 Hamamatsu |
|
4968
|
Thu Jul 14 17:34:35 2011 |
Ishwita, Manuel | HowTo | WienerFiltering | Wiener-Hopf equations | Since we are using Wiener filtering in
our project, we studied the derivation of
Wiener-Hopf equations. Whatever we understood |
|
4967
|
Thu Jul 14 15:27:08 2011 |
steve, | Update | SUS | SUS oplev spectras |
|
7x |
4966
|
Thu Jul 14 09:38:50 2011 |
steve, | Update | SUS | BS oplev spectra |
|
|
4965
|
Thu Jul 14 02:32:11 2011 |
sonali | Update | Green Locking | Power of the AUX laser increased. |
|
|
4964
|
Wed Jul 13 12:24:46 2011 |
Nicole | Update | SUS | Weekly Update | This week, |
    |
4963
|
Tue Jul 12 17:30:24 2011 |
steve, | Update | SUS | BS oplev spectra |
|
|
4962
|
Tue Jul 12 11:52:54 2011 |
Jamie, Suresh | Update | LSC | LSC model updates | The LSC model has been updated:
Binary outputs to control whitening
filter switching
We now take the |
|