40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log, Page 244 of 355  Not logged in ELOG logo
ID Date Author Type Category Subject Text Attachments
  5598   Mon Oct 3 04:43:03 2011 kiwamuUpdateLSCsideband-resonance PRMI lockedMy
goal of today was to lock PRMI without using
AS55 and it is 50% successful.
 ITMYtable.png 
  5597   Sun Oct 2 18:33:36 2011 kiwamuUpdateSUSinversion of the input matrix on ETMX, ITMX and PRMThe input
matrices of ETMX, ITMX and PRM have been
 ETMX.pngPRM.pngITMX.png 
  5596   Sun Oct 2 13:45:13 2011 ranaSummaryGeneralRecovery from the power shutdown: apache / svnRestarted Apache on nodus using Yoichi's
wiki instructions. SVN is back up.
  
  5595   Sun Oct 2 02:33:32 2011 kiwamuUpdateLSCsomething funny with AS55Just a quick report.
The AS55
 outofloop.png 
  5594   Sun Oct 2 02:21:27 2011 kiwamuUpdateSUSfree swinging test once moreThe following optics were kicked:
MC1 MC2 MC3 ETMX ETMY ITMX ITMY PRM
SRM BS
  
  5593   Sat Oct 1 22:53:49 2011 kiwamuSummaryGeneralRecovery from the power shutdown : lockableFound the Marconi for the 11 MHz source
had been reset to its default.
 => reset the parameters.
  
  5592   Sat Oct 1 17:47:21 2011 KojiSummaryGeneralRecovery from the power shutdown[Steve Koji Kiwamu]
- The storage on linux1 and linux1
itself (with this order) were turned on at
  
  5591   Fri Sep 30 19:12:56 2011 KojiUpdateGeneralprep for poweroutage 
 [Koji Jenne]
The lasers were shutdown
  
  5590   Fri Sep 30 18:35:42 2011 steve, kiwamuUpdateVACvacuum set for poweroutageWe did the following:
1, closed V1, VM1,  annuloses:
VASE, VASV, VABS, VAEV,  VAEE and VA6
 prepforpoweroutage.png 
  5589   Fri Sep 30 18:06:24 2011 kiwamuSummaryIOOPZTs straing guage   beforeOutage110930.png 
  5588   Fri Sep 30 17:40:03 2011 kiwamuUpdateIOOAM / PM ratio[Mirko / Kiwamu]
 We have
  
  5587   Fri Sep 30 17:01:29 2011 steveUpdateSUSETMX oplev intensity effect on noiseKiwamu and Steve,
This is one of the better oplev set
up we have. Single bounce from TM, no mirror
 ETMXoplintens.jpgP1080267.JPG 
  5586   Fri Sep 30 16:17:10 2011 kiwamuUpdateGreen Lockingthings to be done for the Yarm green lockThank you for the summary.
I
think now you are getting into a phase where
  
  5585   Fri Sep 30 15:22:17 2011 KatrinUpdateGreen LockingWhat happened on green YARM? 
This is a kind
  
  5584   Fri Sep 30 08:40:02 2011 KojiUpdateLSClength fluctuations in MICH and PRCLTip-Tilts has almost no isolation up to
3Hz, and isolation of about 0.5 up to 10Hz.
They have vertical resonances at around
  
  5583   Fri Sep 30 06:25:20 2011 kiwamuUpdateLSCCalbiration of BS, ITMs and PRM actuatorsThe AC responses
of the BS, ITMs and PRM actuators have been
 actuators.png 
  5582   Fri Sep 30 05:35:42 2011 kiwamuUpdateLSClength fluctuations in MICH and PRCLThe MICH
and PRCL motions have been measured in some
 noise.png 
  5581   Fri Sep 30 03:36:19 2011 SureshUpdateComputer Scripts / ProgramsCIOO modified, but not yet compiledI have added a switch in series with the
WFS_GAIN. And I have also added a LKIN_OUT_MATRX
between the lockin-outputs and the MC suspensions. 
  
  5580   Fri Sep 30 03:14:18 2011 kiwamuUpdateCDSsuspension became crazy : c1sus rebooted

    

       
            
  
  5579   Fri Sep 30 02:56:56 2011 kiwamuUpdateCDSC1IOO.ini and C1LSC.ini files reverted[Suresh/Kiwamu]
We
found that the C1LSC.ini and C1IOO.ini file
  
  5578   Fri Sep 30 01:18:39 2011 kiwamuUpdateASCC1ASS : status updateNow
the C1ASS servos are working fine.
However
  
  5577   Thu Sep 29 20:37:12 2011 MirkoUpdateComputersNew c1oaf c-code: Breaking in new way[Mirko, Jenne]
Programmed a new implementation of
the LMS in C. Compiles fine in gcc. The full
 ADAPT_XFCODE11-09-29---20-12.c 
  5576   Thu Sep 29 12:56:27 2011 JenneUpdateAdaptive FilteringMeditations on the OAF[Mirko, Den, Jenne]
We're modifying the c1oaf model,
and we got to talking about the "Fx"
  
  5575   Thu Sep 29 11:25:55 2011 JenneUpdateAdaptive FilteringTried new c-code, Fail.[Mirko, Jenne]
Mirko edited the c-code to use Den's
stuff that he put in the elog last night. 
  
  5574   Thu Sep 29 03:43:20 2011 kiwamuUpdateASCwrong channel assignment on IPPOSThe
channels for IPPOS had been assigned in a
wrong way.
  
  5573   Thu Sep 29 00:16:35 2011 DenUpdateComputersSegmentation fault fixed.The OAF c-code crashed because of the segmentation
fault. We've created arrays of static variables
  
  5572   Wed Sep 28 22:30:01 2011 JenneUpdateAdaptive FilteringOAF is disabledI am leaving the
OAF disabled, so there should be nothing
  
  5571   Wed Sep 28 22:25:25 2011 JenneUpdateComputersTorturing control computers. Fine again now


   
        
            
  
  5569   Wed Sep 28 21:28:34 2011 MirkoUpdateComputersTorturing control computers. Fine again now[Mirko, Jenne]
We tried to run an extended version
of Matt's LMS adaptive filter c-code. We
  
  5568   Wed Sep 28 21:23:23 2011 MirkoUpdateComputersISCY FE network card / cable not ok[Mirko,Jenne]
We discovered that the left network
cable is not rigidly connected to the back
  
  5567   Wed Sep 28 18:39:50 2011 MirkoUpdatePEMBLRM seismic channels in c1pem[Mirko,Jenne]
Created 5-band BLRMS for seismometer
data (Gur1, Gur2 and STS1 each in x,y,z respectively)
  
  5566   Wed Sep 28 15:33:58 2011 SureshUpdateComputer Scripts / Programsediting database files for medm screens and restarting the slow c1psl machineI changed the names on a switch(SW1) in
the C1:PSL-FSS screen.  To do this I
had to edit the psl.db database file in the
  
  5565   Wed Sep 28 14:15:40 2011 JenneUpdateComputersEdits to c1pem, c1oaf[Mirko, Jenne]
Mirko edited c1pem to have some new
BLRMS channels.
  
  5564   Wed Sep 28 13:30:01 2011 JenneUpdatePSLPMC was unlockedRelocked the PMC.  MC came back immediately.   
  5563   Wed Sep 28 07:46:42 2011 steveUpdateSUSDsub connections at the back of 1X5 are fixed 
 I'm turning  the sus damping 
off for Dsub connection fix at  the
  
  5562   Wed Sep 28 07:36:41 2011 steveUpdateSUSITMY damping restoredITMY suspention damping restored   
  5561   Wed Sep 28 02:42:04 2011 kiwamuUpdateCDSsome DAQ channel lost in c1sus : fb, c1sus and c1pem restartedSomehow
some DAQ channels for C1SUS have disappeared
from the DAQ channel list.
  
  5560   Wed Sep 28 00:06:21 2011 JenneUpdateSUSWatchdog rearmed

    

       
            
  
  5559   Tue Sep 27 20:02:19 2011 KojiUpdateSUSWatchdog rearmedI came to the control room and found the
PMC and IMC were unlocked. ==> Relocked
I found the watch dogs of the vertex
  
  5558   Tue Sep 27 15:33:03 2011 JenneUpdateComputersMaking models, wreaking havoc[Jenne, Mirko, Den]
We have entered into an adventure
in model compiling.  What follows is
  
  5557   Tue Sep 27 11:52:33 2011 JenneUpdateAdaptive FilteringPlan for making MC_F

    
        
  
  5556   Tue Sep 27 11:43:59 2011 JenneUpdateelogElog has been dying a lot lately...WTF?   
  5555   Tue Sep 27 09:47:52 2011 SureshUpdateAdaptive FilteringPlan for making MC_F


   
        
            
  
  5554   Tue Sep 27 08:51:29 2011 PaulUpdateSUSOplev filter optimization for 2 poles and 2 zeros

    

       
            
  
  5553   Tue Sep 27 04:13:22 2011 kiwamuUpdateLSCtonight's locking activityThe lock of PRMI wasn't so robust although
it could stay locked for more than 10 minutes.
 PRMI.png 
  5552   Mon Sep 26 22:40:41 2011 JenneUpdateComputersWe now have BURT restore for slow channels[Jenne, Koji]

After much Perl-learning and a few iterations,
  
  5551   Mon Sep 26 20:04:03 2011 KojiUpdatePSLMC lock has been recovered[Kiwamu Suresh Koji]
Some main parameters of the PSL has
been recovered using Dataviewer and some
 snapshot1.pngsnapshot2.pngsnapshot3.png 
  5550   Mon Sep 26 18:59:11 2011 JenneUpdateAdaptive FilteringPlan for making MC_F


   
        
            
  
  5549   Mon Sep 26 17:49:51 2011 KojiUpdatePSLc1psl [Koji Suresh]
c1psl has got frozen during our ezcaread/write
business. 
  
  5548   Mon Sep 26 17:49:21 2011 JenneUpdateComputersWe now have BURT restore for slow channelsKoji and Suresh found that there have not been any autoburt snapshots   
ELOG V3.1.3-