ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
16658
|
Thu Feb 10 17:57:48 2022 |
Anchal | Update | General | Scheduled power outage recovery - Locking mode cleaner(s) | Something is wrong with the Video MUX.
The system did not turn back on with full
functionality. Even though we see the screens |
|
16659
|
Thu Feb 10 19:03:23 2022 |
Koji | Update | General | Scheduled power outage recovery - Locking mode cleaner(s) | I came back to the 40m and started the
investigation.
If I ping 192.168.113.92, it responds. |
|
16660
|
Thu Feb 10 19:46:37 2022 |
Koji | Update | General | Scheduled power outage recovery - Locking mode cleaner(s) | ==
Assign new IP address to c1sus2 ==
cf: [40m |
|
16661
|
Thu Feb 10 21:10:43 2022 |
Koji | Update | General | Video Mux setting reset | Now the video matrix is responding correctly
and the web interface shows up. (Attachment
1) |
 |
16665
|
Fri Feb 11 11:17:00 2022 |
Anchal | Update | General | Scheduled power outage recovery | I found that two computers are not powering
up in the control room, Ottavia and Allegra.
Allegra was important for us as it had the |
|
16667
|
Fri Feb 11 16:09:11 2022 |
Anchal | Update | General | Scheduled power outage recovery - Input power increased | We increased the input power to IMC by
replacing the 98% transmission BS by a 10%
transmission BS on the detection table (reverse |
|
16669
|
Mon Feb 14 18:31:50 2022 |
Paco | Update | General | Scheduled power outage recovery - IMC recovery progress | [Paco, Anchal, Tega]
We have been realigning the IMC
as of last Friday (02/11). Today we made |
|
16670
|
Mon Feb 14 18:43:49 2022 |
Paco | Summary | General | SOS materials clean room cleared | [Yehonathan, Paco]
We put away most items used / involved
in SOS assembly and characterization. Many |
|
16671
|
Mon Feb 14 21:03:25 2022 |
Koji | Update | General | Scheduled power outage recovery | I opened the boxes. Allegra has obvious
vent of at least 4 caps. And the power supply
did not respond even a paper clip test was |
|
16672
|
Tue Feb 15 19:32:50 2022 |
Koji | Update | General | Scheduled power outage recovery - IMC recovery progress | Reduced the IMC power to 100mW
Setup: The power
meter was placed right before the final aperture |
    |
16673
|
Tue Feb 15 19:40:02 2022 |
Koji | Update | General | IMC locking | IMC
is locking now. There was
nothing wrong: just a careful alignment + |
|
16674
|
Wed Feb 16 15:19:41 2022 |
Anchal | Update | General | Reconfigured MC reflection path for low power | I reconfigured the MC reflection path for
low power. This meant the following changes:
Replaced the 10% reflection |
|
16676
|
Wed Feb 23 15:08:57 2022 |
Anchal | Update | General | Removed extra beamsplitter in MC WFS path | As discussed in the meeting, I removed
the extra beam splitter that dumps most of
the beam going towards WFS photodiodes. |
|
16677
|
Thu Feb 24 14:32:57 2022 |
Anchal | Update | General | MC RFPD DCMON channel got stuck to 0 | I found a peculiar issue today. The C1:IOO-MC_RFPD_DCMON
remains constantly 0. I wonder if the RFPF
output is being read properly. I opened the |
|
16679
|
Thu Feb 24 19:26:32 2022 |
Anchal | Update | General | IMC Locking | I think I have aligned the cavity, including
MC1 such that we are seeing flashing of fundamental
mode and significant transmission sum value |
|
16685
|
Sun Feb 27 00:37:00 2022 |
Koji | Update | General | IMC Locking Recovery | Summary:
- IMC was locked.
- Some alignment change in the output |
    |
16686
|
Sun Feb 27 01:12:46 2022 |
Koji | Update | General | IMC manual alignment procedure | We expect that the MC sus are susceptible
to the temperature change and the alignment
drifts away with time. |
|
16725
|
Tue Mar 15 10:45:31 2022 |
Paco | Update | General | Assembled small in-vac optics | [Paco]
This morning I assembled LO3,
LO4 and AS3 (all |
|
16775
|
Wed Apr 13 16:23:54 2022 |
Ian MacMillan | Update | General | Smell in 40m | [Ian, Paco, JC]
There is a strange smell in the
40m. It smells like a chemically burning |
|
16784
|
Mon Apr 18 15:17:31 2022 |
Jancarlo | Update | General | Tool box and Work Station Organization | I cleaned up around the 40 m lab. All the
Laser Safety Glasses have been picked up
and placed on the rack at the entrance. |
|
16787
|
Mon Apr 18 23:22:39 2022 |
Koji | Update | General | Tool box and Work Station Organization | Whoa! Thanks! |
|
16808
|
Mon Apr 25 14:19:51 2022 |
JC | Update | General | Nitrogen Tank | Coming in this morning, I checked on the
Nitrogen tanks to check the level. One of
the tanks were empty, so I went ahead and |
|
16809
|
Mon Apr 25 14:49:02 2022 |
Koji | Update | General | Nitrogen Tank | For your (and mine) info:
N2 pressure can be monitored on
the 40m summary page: https://nodus.ligo.caltech.edu:30889/detcharsummary/day/20220425/vacuum/ |
|
16901
|
Wed Jun 8 16:33:26 2022 |
Koji | Update | General | Power Outage 220608: HVAC restored | I found the HVACs for the ends were off.
They were turned back on. |
|
16921
|
Wed Jun 15 17:12:39 2022 |
Cici | Summary | General | Preparation for AUX Loop Characterization | [Deeksha, Cici]
We went to the end Xarm station
and looked at the green laser setup and electronics. |
|
16926
|
Thu Jun 16 19:49:48 2022 |
Cici | Update | General | Using the SR785 | [Deeksha, Cici]
We used a python script to collect
data from the SR785 remotely. The SR785 is |
|
16933
|
Tue Jun 21 14:59:22 2022 |
Cici | Summary | General | AUX Transfer Function Loop Exploration | [Deeksha, Cici]
We learned about the auxillary
laser control loop, and then went into the |
|
16944
|
Fri Jun 24 13:29:37 2022 |
Yehonathan | Update | General | OSEMs from KAGRA | The box was given to Juan Gamez (SURF)
|
|
16950
|
Mon Jun 27 13:25:50 2022 |
Cici | Update | General | Characterizing the Transfer Loop | [Deeksha, Cici]
We first took data of a simple
low pass filter, and attempted to perform |
   |
16953
|
Tue Jun 28 09:03:58 2022 |
JC | Update | General | Organizing and Cleaning | The plan for
the tools in 40m
As of right now, there are 4 tool |
|
16955
|
Tue Jun 28 16:26:58 2022 |
Cici | Summary | General | Vector fitting open loop transfer function/Audio cancellation of optical table enclosure | [Deeksha, Cici]
We attempted to use vectfit to
fit our earlier transfer function data, and |
   |
16982
|
Fri Jul 8 23:10:04 2022 |
Koji | Summary | General | July 9th, 2022 Power Outage Prep | The 40m team worked on the power outage
preparation. The detailed is summarized on
this wiki page. We will still be able to |
|
16988
|
Mon Jul 11 19:29:23 2022 |
Paco | Summary | General | Finalizing recovery -- timing issues, cds, MC1 | [Yuta, Koji, Paco]
Restarting
CDS
We were having |
|
16993
|
Tue Jul 12 18:35:31 2022 |
Cici Hanna | Summary | General | Finding Zeros/Poles With Vectfit | Am still working on using vectfit to find
my zeros/poles of a transfer function - now
have a more specific project in mind, which |
|
17003
|
Thu Jul 14 19:09:51 2022 |
rana | Update | General | EQ recovery | There was a EQ in Ridgecrest (approximately
200 km north of Caltech). It was around 6:20
PM local time. |
|
17006
|
Fri Jul 15 16:20:16 2022 |
Cici Hanna | Update | General | Finding UGF | I have temporarily abandoned vectfit and
aaa since I've been pretty unsuccessful
with them and I don't need poles/zeroes |
   |
17021
|
Wed Jul 20 11:58:45 2022 |
Paco | Summary | General | Jenne laser kaput? | [Paco, Yehonathan, JC]
We were trying to setup the Jenne
laser to characterize the response of three |
|
17022
|
Wed Jul 20 14:12:07 2022 |
Paco | Summary | General | Jenne laser kaput! | [Koji, Yehonathan, Paco]
Koji pointed out that this laser
was always driven with a current driver (which |
|
17023
|
Wed Jul 20 15:58:52 2022 |
Koji | Summary | General | Jenne laser kaput! | For troubleshooting, the proper laser driver
(found beneath the AG network analyzer) was
connected. |
|
17027
|
Fri Jul 22 17:43:19 2022 |
Koji | Update | General | Obtained a functional CRT | [Koji Paco]
Koji went to Downs and found a
CRT labeled "for 40m Rana?". So |
|
17030
|
Mon Jul 25 09:05:50 2022 |
Paco | Summary | General | Testing 950nm laser found in trash pile | [Paco, Yehonathan]
==== Late elog from Friday ====
Koji provided us with a QFLD-950-3S |
 |
17051
|
Mon Aug 1 17:19:39 2022 |
Cici | Summary | General | RPitaya Data on Jupyter Notebook | Have successfully plotted data from the
Red Pitaya on Jupyter Notebook! Have
lost years of my life fighting with PyQt. |
|
17055
|
Wed Aug 3 15:01:13 2022 |
Koji | Update | General | Borrowed Dsub cables | Borrowed DSUB cables for
Juan's SURF project |
|
17064
|
Fri Aug 5 17:03:31 2022 |
Yehonathan | Summary | General | Testing 950nm laser found in trash pile | I set out to test the actuation bandwidth
of the 950nm laser. I hooked the laser to
the output of the bias tee of PD testing |
 |
17070
|
Wed Aug 10 15:33:59 2022 |
Cici | Update | General | Working Red Pitaya VNA | TL;DR: I am now able to inject a swept
sine and measure a transfer function with
python on my Red Pitaya! Attached is |
|
17071
|
Wed Aug 10 19:24:19 2022 |
rana | Update | General | Working Red Pitaya VNA |
Boom! |
|
17072
|
Wed Aug 10 19:36:45 2022 |
Koji | Bureaucracy | General | Lab cleaning and discovery | During the cleaning today, we found many
legacy lab items. Here are some policies
what should be kept / what should be disposed |
   |
17076
|
Thu Aug 11 17:15:33 2022 |
Cici | Update | General | Measuring AUX Laser UGF with Red Pitaya | TL;DR: Have successfully measured the UGF
of the AUX laser on my Red Pitaya! Attached
is one of my data runs (pdf + txt file). |
 |
17077
|
Fri Aug 12 02:02:31 2022 |
Koji | Update | General | Power Outage Prep: nodus /home/export backup | Took the backup (snapshot) of /home/export
as of Aug 12, 2022
controls@nodus> |
|
17078
|
Fri Aug 12 13:40:36 2022 |
JC | Update | General | Preparing for Shutdown on Saturday, Aug 13 | [Yehonathan, JC]
Our first step in preparing for
the Shutdown was to center all the OpLevs. |
|