40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Tue Dec 10 15:13:55 2013, Koji, Update, IOO, IMC servo inspection 
    Reply  Thu Dec 12 14:57:01 2013, Koji, Update, IOO, IMC servo inspection OLTF_IMC.pdfAOTF_IMC.pdf131209.zip
       Reply  Fri Dec 13 18:03:00 2013, Den, Update, IOO, common mode servo CM_OL.pdfCM_CL.pdf
          Reply  Fri Dec 13 23:07:04 2013, Koji, Update, IOO, common mode servo 
          Reply  Sat Dec 14 11:56:54 2013, rana, Update, LSC, common mode servo 
             Reply  Sat Dec 14 14:21:46 2013, Den, Update, LSC, common mode servo 
Message ID: 9470     Entry time: Fri Dec 13 23:07:04 2013     In reply to: 9468
Author: Koji 
Type: Update 
Category: IOO 
Subject: common mode servo 

Looks good.

Once the control cable (bakplane cable) is identified, we can install the module to the LSC analog rack.

We should be able to test the CM servo with either POX or POY and only one correspoding arm without modifying the servo TF.
Just for this test, we don't need to use MCL.

ELOG V3.1.3-