40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 9328     Entry time: Fri Nov 1 18:59:41 2013
Author: Evan 
Type: Configuration 
Category: ISS 
Subject: AOM cabling 

[Rana, Nic, Evan]

We did some work today on getting the AOM back up and running so that we can implement an SR560-based ISS.

We've removed the 18 AWG wire that was previously used to power the driver and have replaced it with a 12 AWG twisted pair (black and white, enclosed in a single gray cladding). This pair runs into the PSL rack's 24 V terminal block with a 2 A fuse. We've also replaced the cable connecting the AOM to the driver; it's now RG405.

Also disconnected the power to the old Kalmus FSS crystal driver box and turned it off. It was powered illegally. Also disconnected the power connection between the Sorensen and the old ISS AA chassis since it was wired directly without any fuse (which is a code violation). It will stay off until someone uses a proper fuse and wiring to hook it back up.

Attachment 1: aom.jpg  274 kB  Uploaded Fri Nov 1 20:14:07 2013  | Hide | Hide all
Attachment 2: aom_driver.jpg  274 kB  Uploaded Fri Nov 1 20:14:16 2013  | Hide | Hide all
Attachment 3: aom_driver_power.jpg  355 kB  Uploaded Fri Nov 1 20:14:29 2013  | Hide | Hide all
Attachment 4: 20131101_170120.jpg  1.701 MB  Uploaded Tue Nov 5 16:42:33 2013  | Hide | Hide all
ELOG V3.1.3-