40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
40m Log |
Not logged in |
 |
|
Thu Oct 24 04:13:15 2013, Jenne, Update, LSC, PRMI + 2 ALS arms
|
Thu Oct 24 08:04:54 2013, Steve, Update, LSC, PRMI + 2 ALS arms
|
Thu Oct 24 09:08:27 2013, jamie., Update, LSC, PRMI + 2 ALS arms
|
Thu Oct 24 14:14:18 2013, rana, Update, LSC, PRMI + 2 ALS arms
|
Thu Oct 24 15:19:58 2013, Koji, Update, LSC, PRMI + 2 ALS arms
|
Thu Oct 24 23:25:37 2013, Jenne, Update, LSC, End transmission triggering
|
Tue Nov 5 16:47:09 2013, Jenne, Update, LSC, End transmission QPDs
|
Fri Oct 25 04:03:40 2013, Masayuki, Update, LSC, 'scope and spectrum analyser for REFL165
|
Fri Oct 25 21:36:51 2013, Masayuki, Update, LSC, 'scope and spectrum analyser for REFL165
|
Mon Oct 28 14:24:01 2013, Masayuki, Update, LSC, 'scope and spectrum analyser for REFL165
|
Mon Oct 28 18:57:27 2013, Masayuki, HowTo, LSC, read 'scope and spectrum analyser datas
|
|
Message ID: 9304
Entry time: Mon Oct 28 14:24:01 2013
In reply to: 9295
Reply to this: 9305
|
Author: |
Masayuki |
Type: |
Update |
Category: |
LSC |
Subject: |
'scope and spectrum analyser for REFL165 |
|
|
I connected the 'scope between REFL165 output and demod board input. I split the signal from coupler using the splitter (Mini-Circuits ZFSC-2-5). One signal is going to 'scope CH1 and the other is going to spectrum analyzer. I connected the 'scope to 40MARS. The IP adress is 192.168.113.25. I connected that by cabling from 1X2.
|