[From yesterday] ASS for X arm was behaving slightly funny over the last couple of days. ASS could not correct the BS misalignment. Jenne pointed out that the LSC output matrix on the ASS medm screen set itself to zeroes whenever we ran the ASS_dither_ON script. I checked the burt request file: ASS_DITHER_ON.req  in /opt/rtcds/caltech/c1/scripts/ASS and found that the LSC output matrix channels were not added to it. I added these channels for both the X and Y arm. Following this, I also edited the corresponding snap file as well. This should now set the LSC matrix to the right values everytime we run the script.