40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 8971     Entry time: Tue Aug 6 12:43:23 2013
Author: Alex Cole 
Type: Configuration 
Category: Electronics 
Subject: AS Table and Rack 1Y1 Additions 

For the photodetector frequency response project, I finished the construction of our baluns chassis and mounted it in rack 1Y1 (1st picture).

After consulting with Jenne, I mounted the fiber launcher for REFL165 on the AS table such that it would not cause an obstruction. I aligned the launcher using a multimeter to monitor the DC output of REFL165, but looking at the data I got, it seems I need to do a better alignment/focusing job to get rid of a bunch of noise.

Attachment 1: photo_1_(5).JPG  142 kB  | Show | Show all
Attachment 2: photo_2_(5).JPG  130 kB  | Show | Show all
ELOG V3.1.3-