40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
40m Log |
Not logged in |
 |
|
Thu Aug 1 12:12:35 2013, gautam, Update, CDS, New model for endtable PZTs
|
Thu Aug 1 13:09:17 2013, gautam, Update, CDS, New model for endtable PZTs-procedure
|
Thu Aug 1 15:06:59 2013, jamie, Update, CDS, New model for endtable PZTs
|
Thu Aug 1 15:28:44 2013, gautam, Update, CDS, New model for endtable PZTs-problem solved
|
Thu Aug 1 20:58:56 2013, gautam, Update, CDS, New model for endtable PZTs-MEDM Screens setup   
|
Mon Aug 5 18:18:32 2013, gautam, Update, CDS, Choosing LO Amplitudes and Frequencies
|
Mon Aug 5 19:10:01 2013, Koji, Update, CDS, Choosing LO Amplitudes and Frequencies
|
Tue Aug 6 16:36:51 2013, gautam, Update, CDS, Choosing LO Amplitudes and Frequencies-revised
|
Wed Aug 7 23:40:49 2013, gautam, Update, CDS, X-End Green ASS - A first update
|
Sat Aug 10 05:53:51 2013, gautam, Update, CDS, X-End Green ASS - Roundup
|
Mon Aug 12 12:57:59 2013, Jenne, Update, CDS, X-End Green ASS - Roundup
|
Mon Aug 12 13:30:33 2013, Jamie, Update, CDS, X-End Green ASS - Roundup
|
|
Message ID: 8968
Entry time: Mon Aug 5 19:10:01 2013
In reply to: 8966
Reply to this: 8972
|
Author: |
Koji |
Type: |
Update |
Category: |
CDS |
Subject: |
Choosing LO Amplitudes and Frequencies |
|
|
- I suppose the green transmission paths were thoroughly inspected and aligned in prior to the measurement
- Of course it is a BAD idea to use 60Hz as the LO frequency.
- Power spectra should be plotted as "RIN (relative intensity noise)" as the DC of 1 and 100 gives you 100 times different power spectra for the same beam.
Don't forget to subtract the offset from your DC values. |