40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
40m Log |
Not logged in |
 |
|
Tue Jul 9 11:37:37 2013, gautam, Update, CDS, set up for testing DAC Interface-board pin outs
|
Tue Jul 9 12:01:20 2013, gautam, Update, CDS, set up for testing DAC Interface-board pin outs
|
Tue Jul 9 18:44:37 2013, gautam, Update, CDS, DAC Interface Board-Pin Outs 
|
Tue Jul 23 04:07:48 2013, gautam, Update, CDS, Excitation points set up on c1scx
|
Tue Jul 23 16:47:01 2013, gautam, Update, CDS, Excitation points set up on c1scx
|
Tue Jul 23 19:38:58 2013, gautam, Update, CDS, Characterisation of DAC at 1X9
|
|
Message ID: 8900
Entry time: Tue Jul 23 04:07:48 2013
In reply to: 8814
Reply to this: 8909
|
Author: |
gautam |
Type: |
Update |
Category: |
CDS |
Subject: |
Excitation points set up on c1scx |
|
|
In light of recent events and the decision to test the piezo tip-tilts for green beam steering on the X-end table, I have set up 8 excitation points to channels 8 through 15 of the DAC on c1scx (as was done earlier for the DAC at 1Y4 with Jenne's help) in order to verify that the pin-outs of the DAC interface board. I have not yet compiled the model or restarted the computer, and will do these tomorrow, after which I will do the test. The channels are named YYY_CHAN9 etc.
|