40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Jul 22 17:17:30 2013, annalisa, Update, endtable upgrade, End table picture YendTable.jpg
    Reply  Tue Jul 23 00:51:46 2013, Koji, Update, endtable upgrade, End table picture P7224222.JPGP7224223.JPGP7224224.JPGP7224238.JPG
       Reply  Tue Jul 23 19:37:08 2013, Annalisa, Update, endtable upgrade, End table picture IMG950073.jpgIMG950072.jpg
    Reply  Wed Sep 25 19:34:51 2013, rana, Update, SUS, Problems with ETMY Optical Lever ETMY-BadHeNe.pdf
       Reply  Thu Sep 26 11:00:51 2013, Steve, Update, SUS, Problems with ETMY Optical Lever 
          Reply  Thu Sep 26 21:55:08 2013, rana, Update, SUS, Problems with ETMY Optical Lever 
Message ID: 8896     Entry time: Tue Jul 23 00:51:46 2013     In reply to: 8892     Reply to this: 8910
Author: Koji 
Type: Update 
Category: endtable upgrade 
Subject: End table picture 

The spot on the IPANG QPD was checked. The spot is higher than the center and South side of the lens.
Some photos are found below.

The spot on the IPANG steering mirrors in the ETMY chamber was also checked.
It is clipped at the top of the steering mirror. (See attachment 4)
So basically the spot is about 1" above the center of the mirror.

Attachment 1: P7224222.JPG  439 kB  | Hide | Hide all
P7224222.JPG
Attachment 2: P7224223.JPG  418 kB  | Hide | Hide all
P7224223.JPG
Attachment 3: P7224224.JPG  449 kB  | Hide | Hide all
P7224224.JPG
Attachment 4: P7224238.JPG  329 kB  | Hide | Hide all
P7224238.JPG
ELOG V3.1.3-