40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Jul 9 17:03:06 2013, Steve, Update, Green Locking, fiber layed for Y arm fromETMYtowardPSL.jpgfibreETMYtoPSL50m.jpgPSLfiberfromETMY.jpg
    Reply  Wed Jul 10 14:49:00 2013, Steve, Update, Green Locking, more fiber protective tubing layed  fibreETMXprotectedendOnly.jpg
    Reply  Mon Feb 24 17:21:42 2014, Steve, Update, Green Locking, green fiber status today 6x
Message ID: 8822     Entry time: Wed Jul 10 14:49:00 2013     In reply to: 8813
Author: Steve 
Type: Update 
Category: Green Locking 
Subject: more fiber protective tubing layed  

Quote:

Craig, Gautam and Steve,

Single mode fiber 50m long is layed out into cable tray that is attached to the beam tube of the Y arm.

It goes from ETMY to PSL enclosure. It is protected at both ends with " clear- nylon slit corrugated loom tubing " 1.5" ID

The fiber is not protected between 1Y1 and 1Y4

 Installed 0.5" ID 10 ft long protective tubing at the PSL end of the  ETMY fiber this morning. Here I had to cable tie a bunch of cables at the east side of the PSL enclosure.

They were hanging off the table blocking space were the sliding doors move.

 At the ETMX end of the X-arm fiber received the same protective tubing.

Attachment 1: fibreETMXprotectedendOnly.jpg  212 kB  Uploaded Fri Jul 12 09:47:39 2013  | Hide | Hide all
fibreETMXprotectedendOnly.jpg
ELOG V3.1.3-