40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue May 14 01:56:20 2013, Jenne, Update, Green Locking, Xend Green tweaked 
    Reply  Tue May 14 02:19:13 2013, Koji, Update, Green Locking, Xend Green tweaked 
    Reply  Tue May 21 18:18:23 2013, Manasa, Update, Green Locking, Xend Green aligned 
       Reply  Tue May 21 23:29:57 2013, Manasa, Update, Green Locking, Xend Green aligned 
          Reply  Tue May 28 19:35:17 2013, Manasa, Update, Green Locking, Still searching for the X green beat note 
             Reply  Thu May 30 01:02:41 2013, Manasa, Update, Green Locking, Found it! IMG_0598.JPGIMG_0599.JPG
                Reply  Mon Jun 3 21:09:55 2013, Manasa, Update, Green Locking, X green beatnote through beatbox IMG_0608.JPG
                   Reply  Tue Jun 11 22:16:56 2013, Manasa, Summary, Green Locking, ALS for X arm 
                      Reply  Thu Jun 13 22:31:12 2013, Manasa, Summary, Green Locking, X arm ALS IMG_0659.JPGALS_stabilized_13June2013.png
                         Reply  Fri Jun 14 07:06:19 2013, Koji, Summary, Green Locking, X arm ALS 
Message ID: 8708     Entry time: Fri Jun 14 07:06:19 2013     In reply to: 8703
Author: Koji 
Type: Summary 
Category: Green Locking 
Subject: X arm ALS 

It's nice that we are now able to scan the cavity again. We got close to PRMI+one arm one step further.
The calibration of the scan frequency and the evaluation of the in-loop/out-of-loop error signal in terms of (Hz/rtHz) would be necessary.

The beat amplitude looks actually huge aIthough I don't know where you are monitoring.
Talk to Jamie to figure out how much the signal should be at the monitoring point.
If it is more than we are supposed to have, put an attenuator somewhere.

ELOG V3.1.3-