40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 8520     Entry time: Wed May 1 17:36:26 2013
Author: Riju 
Type: Configuration 
Category: RF System 
Subject: PD frequency response 

 Today I routed fiber from 1x16 splitter to POY table. Manasa helped me doing that. The fiber(25m) was laid on overhead rack through plastic pipe of length ~76ft. We put the fiber inside the pipe using one copper tube, and then tied the plastic pipe on the overhead rack. Finally one end of the fiber was laid on POY table and the other end was connected to the 1x16 splitter. The photographs corresponding are attached. There is no picture of splitter end, cause it was dark that time.

Attachment 1: IMG_0517.JPG  4.884 MB  | Hide | Hide all
IMG_0517.JPG
Attachment 2: IMG_0518.JPG  4.839 MB  | Hide | Hide all
IMG_0518.JPG
Attachment 3: IMG_0519.JPG  4.934 MB  | Hide | Hide all
IMG_0519.JPG
ELOG V3.1.3-