40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Apr 25 17:56:28 2013, Riju, Configuration, , PD frequency response IMG_0495.JPG
    Reply  Thu Apr 25 18:58:06 2013, Koji, Configuration, , PD frequency response 
       Reply  Fri Apr 26 17:08:42 2013, Riju, Configuration, , PD frequency response 
    Reply  Fri Apr 26 21:38:06 2013, Jenne, Configuration, RF System, PD frequency response IMG_0498.JPGIMG_0499.JPGIMG_0500.JPG
Message ID: 8493     Entry time: Thu Apr 25 18:58:06 2013     In reply to: 8492     Reply to this: 8497
Author: Koji 
Type: Configuration 
Category:  
Subject: PD frequency response 

No.... what I told was to put the roll next to the splitter, not on the table.
The table area is more precious than the rack space.

Koji> The slack of the fibers should be nicely rolled and put together at the splitter side.

ELOG V3.1.3-