All FE computers are back.
Restart procedure:
0a. Restart frame builder: telnet fb 8087 & type shutdown
0b. Restart mx_stream from the FE overview screen
1. I ssh ed to the computer. (c1lsc, c1ioo, c1iscex, c1isey)
2. I used 'sudo shutdown -r (computername) '. They came back ON.
3. While rebooting c1ioo, c1sus shutdown (for reasons I don't know). I could not ping or ssh c1SUS after this.
4. I went in and switched c1SUS computer OFF and back ON after which I could ssh to it.
5. I did the same reboot procedure for c1SUS.
6. I had to restart some of the models individually.
(i) ssh to the computer running the model
(ii) rtcds restart 'model name'
7. All computers are back now.

|