40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Mar 8 12:57:57 2013, Annalisa, Update, ABSL, BS installed on ITMY table 
    Reply  Fri Mar 8 13:42:35 2013, Jenne, Update, ABSL, BS installed on ITMY table 
Message ID: 8257     Entry time: Fri Mar 8 12:57:57 2013     Reply to this: 8258
Author: Annalisa 
Type: Update 
Category: ABSL 
Subject: BS installed on ITMY table 

 Sendhil and I installed the S polarized BS on the ITMY table to steer the NPRO beam through the AR wedge and align it to the POY beam. 

We took a shutter from the BSPRM table (which was not used) and a beam dump from the AS table (which was used by the auxiliary laser already removed and installed on the ITMY).

To do: do better alignment of the NPRO beam, maybe installing some iris after the BS and before the AS wedge, phase lock the two beams. 

ELOG V3.1.3-