40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Thu Jan 31 20:06:22 2013, Evan, Update, Locking, PRM/PR2 cavity 
    Reply  Thu Jan 31 23:48:45 2013, Koji, Update, Locking, PRM/PR2 cavity 
       Reply  Fri Feb 1 09:33:11 2013, Jamie, Update, Locking, PRM/PR2 cavity 
          Reply  Fri Feb 1 15:12:53 2013, Jenne, Update, Locking, PRM/PR2 cavity 
             Reply  Fri Feb 1 19:55:33 2013, Jenne, Update, Locking, PRM/PR2 cavity 
                Reply  Fri Feb 1 23:12:42 2013, Koji, Update, Locking, PRM/PR2 cavity 
                Reply  Fri Feb 1 23:52:59 2013, rana, Update, Locking, PRM/PR2 cavity 
Message ID: 7988     Entry time: Fri Feb 1 23:52:59 2013     In reply to: 7986
Author: rana 
Type: Update 
Category: Locking 
Subject: PRM/PR2 cavity 

 Very exciting result, if true. I suppose we should try to reconfirm this result by doing another phase map of PRM03.

Is it possible that PR2 is not flat? How would we test to see if the tip-tilt frame screw gives it a curvature? Perhaps we can check with COMSOL.

ELOG V3.1.3-