40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Dec 19 18:40:00 2012, Jenne, Update, IOO, PZT1 removed, TT1 in place 
    Reply  Wed Dec 19 19:28:12 2012, Manasa, Update, IOO, PZT1 removed, TT1 in place 
       Reply  Thu Dec 20 10:11:12 2012, Manasa, Update, IOO, TT1 connections 
          Reply  Thu Dec 20 10:35:27 2012, Steve, Update, IOO, TT1 connections 
Message ID: 7858     Entry time: Wed Dec 19 19:28:12 2012     In reply to: 7857     Reply to this: 7861
Author: Manasa 
Type: Update 
Category: IOO 
Subject: PZT1 removed, TT1 in place 

Quote:

Tip Tilt, serial number ### (Manasa will get the serial number and put it in the elog) was taken out of the cleanroom, for use as TT1.

 

Depending on how far things get tonight, Jamie and Manasa may ask Steve to help them remove the BS door, so they can get started on replacing PZT2 with TT2.

Tip-Tilt TT1

 

I have fixed TT1 close to what it's position looks like in the CAD drawing. Only 2/3 of TT1 rests on the table...so we need to be extra careful when we will move it for alignment.

Serial Number:  SN 027

dcc number: D1001450-V2

 We are still in the process of removing the quadrupus from the TT, figuring out which connector goes where, putting it on correctly, and re-testing.

We closed the IMC chamber with light doors calling it a day!

 

ELOG V3.1.3-