40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Nov 30 02:40:44 2012, Den, Update, Adaptive Filtering, YARM yarm_oaf.png
    Reply  Fri Nov 30 11:49:24 2012, Koji, Update, Adaptive Filtering, YARM 
       Reply  Fri Nov 30 14:21:18 2012, rana, HowTo, Computer Scripts / Programs, The mystery of PDFs and you. As deep as the mystery of Rasputin. darm.pdf
       Reply  Fri Nov 30 22:11:50 2012, Den, Update, Adaptive Filtering, ARMS arms_oaf.pdf
          Reply  Sat Dec 1 00:13:16 2012, Den, Update, Adaptive Filtering, ARMS and MC arms_mcl_oaf.pdf
Message ID: 7771     Entry time: Sat Dec 1 00:13:16 2012     In reply to: 7769
Author: Den 
Type: Update 
Category: Adaptive Filtering 
Subject: ARMS and MC 



 I actuate on ETMY for YARM and ETMX for XARM. For now I did adaptive filtering for both arms at the same time. I used the same parameters for xarm as for yarm.

I've notched 16 Hz resonance because it has high Q and I need to think more how to subtract it using FIR filter or apply IIR.

I'll try MC stabilazation method.

 Adaptive filtering was applied to MC and X,Y arms at the same time. I used a very aggressive (8 order) butterworth filter at 6 Hz as an AI filter for MC not to inject noise to ARMS as was done before

Mu for MC was 0.2, downsample = 16, delay = 1. I was able to subtract 1 Hz. Stack subraction is not that good as for arms but this is because I used only one seismometer for MC that is under the BS. I might install accelerometers under MC2.

EDIT, JCD, 18Feb2013:  Den remembers using mu for the arms in the range of 0.01 to 0.1, although using 0.1 will give extra noise.  He said he usually starts with something small, then ramps it up to 0.04, and after it has converged brings it back down to 0.01.

Attachment 1: arms_mcl_oaf.pdf  22 kB  | Hide | Hide all
ELOG V3.1.3-