40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Nov 7 19:07:45 2012, Jenne, Update, Cameras, No beam seen on external camera views BS_PRM_7Nov2012_SpotImage_pixelsTimes3.pngETMXF_7Nov2012_SpotImage_pixelsTimes3.pngETMYF_7Nov2012_SpotImage_pixelsTimes3.pngITMYF_7Nov2012_SpotImage_pixelsTimes3.pngMC2F_7Nov2012_SpotImage_pixelsTimes3.png
    Reply  Tue Nov 13 00:19:51 2012, Jenne, Update, Cameras, ITMX is just fine 
Message ID: 7700     Entry time: Tue Nov 13 00:19:51 2012     In reply to: 7685
Author: Jenne 
Type: Update 
Category: Cameras 
Subject: ITMX is just fine 

Quote:

In other, semi-unrelated news, the ITMXF camera has been not working for a while.  The bottom right quad on the test mass tv has been dark for at least a week or two.  Steve, when you have a chance (after the oplevs are all taken care of), can you see if there's something obvious that's wrong?

 While helping Charles string the ethernet cable (elog 7698) for the power strip in the vertex (from 1Y1 to 1X1), I looked at the ITMX power cord.  It was connected to the same power strip as the illuminator, which, since the illuminator was turned off by turning off the power strip, meant no power was going to the camera.  Since Charles is very close to having the new power strips set up, I unplugged the ITMX illuminator and turned the power strip back on.  ITMX camera is back to normal.

ELOG V3.1.3-