40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Nov 8 22:04:43 2012, Charles, Update, Electronics, Ethernet Illuminator Control 
    Reply  Mon Nov 12 23:38:50 2012, Charles, Update, Electronics, Ethernet Illuminator Control 
       Reply  Tue Nov 13 00:27:50 2012, Jenne, Update, Electronics, Ethernet Illuminator Control 
Message ID: 7698     Entry time: Mon Nov 12 23:38:50 2012     In reply to: 7691     Reply to this: 7701
Author: Charles 
Type: Update 
Category: Electronics 
Subject: Ethernet Illuminator Control 

Quote:

Configured ethernet controlled power strips to have static IP addresses: 192.168.113.110, 192.168.113.111 and 192.168.113.112.

Wrote a python script to interact with the power strips that can turn individual sockets on or off via telnet.

This functionality will be implemented on the control room computer GUIs in short order.

 The ethernet power strips have been installed. 192.168.113.110 is on ETMX, 192.168.113.111 is on ETMY and 192.168.113.112 is on the vertex. I have also written an EPICS file "illuminator_control.adl" (currently stored in my named directory) that allows a user to turn individual sockets on and off at each of the three locations. Some short tests have indicated that everything is in working order.

Currently, no illuminators are hooked up to the power strips. However, the power control will most likely be ready for use tomorrow, granted I can find and use extension cords so that the illuminators might reach their respective power strips.

ELOG V3.1.3-