40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Oct 25 22:52:07 2012, janosch, Update, General, tip-tilt phase maps 6x
    Reply  Thu Oct 25 23:00:44 2012, Manasa, Update, General, tip-tilt phase maps 
       Reply  Thu Oct 25 23:14:42 2012, janosch, Update, General, tip-tilt phase maps 
          Reply  Mon Oct 29 11:27:42 2012, Manasa, Update, General, tip-tilt phase maps 6x
             Reply  Mon Oct 29 14:57:41 2012, janosch, Update, General, tip-tilt phase maps 
Message ID: 7629     Entry time: Thu Oct 25 23:14:42 2012     In reply to: 7628     Reply to this: 7638
Author: janosch 
Type: Update 
Category: General 
Subject: tip-tilt phase maps 

Quote:

Are these maps drawn from the data we extracted using Image SXM??

 Indeed. So the only manipulation that I did was to remove the tilt (since this should usually be seen as an artifact of the measurement, or better, we can assume that tilt is compensated by alignment). I did not remove the curvature.

ELOG V3.1.3-