40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Oct 24 14:15:34 2012, Ayaka, Update, Adaptive Filtering, microphone noise mic_open.pngmic_noise.png
    Reply  Wed Oct 24 15:29:52 2012, rana, Update, Adaptive Filtering, microphone noise 
       Reply  Wed Oct 24 17:02:01 2012, Jenne, Update, Adaptive Filtering, microphone noise 
       Reply  Wed Oct 24 22:20:24 2012, Den, Update, Adaptive Filtering, microphone noise mic_64k.pdf
          Reply  Thu Oct 25 09:53:23 2012, Ayaka, Update, Adaptive Filtering, microphone noise 
          Reply  Thu Oct 25 10:03:38 2012, rana, Update, Adaptive Filtering, microphone noise 
             Reply  Thu Oct 25 14:39:14 2012, Den, Update, Adaptive Filtering, microphone noise 
Message ID: 7610     Entry time: Wed Oct 24 17:02:01 2012     In reply to: 7609
Author: Jenne 
Type: Update 
Category: Adaptive Filtering 
Subject: microphone noise 

Quote:

  We have to change the sample rate and AA filter for the mic channels before going too far with the circuit design.

 To save the mic channels at higher than 2k (which we should do), we either have to move them to a different model, change the rate of the PEM model, or see if you can save data faster than the model runs (which I can't imagine is possible).

ELOG V3.1.3-