|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| 40m Log |
Not logged in |
 |
|
|
 Wed Oct 10 19:22:03 2012, jamie, Update, IOO, Added control for input tip-tilts to c1ass 
|
 Thu Oct 11 12:11:23 2012, jamie, Update, IOO, c1ass with new DAC0 output has been recompiled/install/restarted
| |
Mon Oct 15 20:45:58 2012, jamie, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards
| |
Tue Oct 16 00:08:26 2012, Den, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards
| |
Tue Oct 16 20:40:06 2012, Den, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards
|
|
|
Message ID: 7561
Entry time: Tue Oct 16 20:40:06 2012
In reply to: 7553
|
| Author: |
Den |
| Type: |
Update |
| Category: |
IOO |
| Subject: |
c1lsc DAC0 now connected to tip-tilt SOS DW boards |
|
|
Full cable path from coil driver to osem input is now ready. I've tested Ch1-4 of the left AI and left coil driver. 15 pin outputs and monitors show voltage that we expect. I've checked voltage on the other side of the cable in the clean room, it is correct. We are ready to test the coils. We need to bake osem cables asap. Hopefully, Bob will start this job tomorrow.
 
|