40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Oct 11 00:28:30 2012, Den, Update, SUS, diagonalization mc1_new.pdfmc123_new.pdf
    Reply  Thu Oct 11 01:30:11 2012, Den, Update, SUS, diagonalization mc1_coils.pdf
    Reply  Thu Oct 11 14:40:20 2012, Den, Update, SUS, diagonalization mc1.pdf
Message ID: 7526     Entry time: Thu Oct 11 01:30:11 2012     In reply to: 7525
Author: Den 
Type: Update 
Category: SUS 
Subject: diagonalization 


MC1 diagonalization is poor, better then before, but still pitch is seen in pos and yaw. Either smth is malfunctioning or flags touch sensors and do not move freely. On the plot mc1_new black lines - before, red - after rediagonalization.

 I've actuated on MC1 with UL, UR, LR, LL coils in turn and measured sensor readings. All coils separately work fine from the first look.

On the plot: black - free mirror, blue - UL coil actuation, green - UR, grey - LR, red - LL.

Attachment 1: mc1_coils.pdf  53 kB  | Show | Show all
ELOG V3.1.3-