40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Oct 11 00:28:30 2012, Den, Update, SUS, diagonalization mc1_new.pdfmc123_new.pdf
    Reply  Thu Oct 11 01:30:11 2012, Den, Update, SUS, diagonalization mc1_coils.pdf
    Reply  Thu Oct 11 14:40:20 2012, Den, Update, SUS, diagonalization mc1.pdf
Message ID: 7525     Entry time: Thu Oct 11 00:28:30 2012     Reply to this: 7526   7532
Author: Den 
Type: Update 
Category: SUS 
Subject: diagonalization 

I've written MC123 input matrixes to the front-end.

MC1 diagonalization is poor, better then before, but still pitch is seen in pos and yaw. Either smth is malfunctioning or flags touch sensors and do not move freely. On the plot mc1_new black lines - before, red - after rediagonalization.

Attachment 1: mc1_new.pdf  133 kB  | Hide | Hide all
mc1_new.pdf
Attachment 2: mc123_new.pdf  54 kB  | Hide | Hide all
mc123_new.pdf
ELOG V3.1.3-