40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Aug 10 09:47:19 2012, Masha, Update, Computers, FE Status 
    Reply  Fri Aug 10 11:08:26 2012, jamie, Update, Computers, FE Status 
Message ID: 7138     Entry time: Fri Aug 10 09:47:19 2012     Reply to this: 7143
Author: Masha 
Type: Update 
Category: Computers 
Subject: FE Status 

The c1lsc and c1sus screens are red in the front-end status. I restarted the frame builder, and hit the "global diag reset" button, but to no avail. Yesterday, the only thing Den and I did to c1sus was install a new c1pem model. I got rid of the changes and switched to the old one (I ran rtcds build, install, restart), but the status is still the same.

ELOG V3.1.3-