I turned on the ASS, without closing the loops, to try to measure the sensing matrix. 

The Yarm was locked (Eric did a nice job earlier - he'll ELOG ABOUT IT before he goes home!), and I used an LO CLKGAIN of 300 on all of the TRY Lockins.  Then I put on and took away a 10% offset in pitch, but it's almost impossible to see the difference. 

The attached is a truly awful screenshot, but you can kind of see what's going on.  The big steps are me increasing the LO gain, but around "0" on the x-axis I changed the pitch offset from 10% away to nominal.  Since there are such big oscillations, the change is basically non-existent.  Grrrr. I'll look at it again tomorrow, since I have an exiting bike ride home ahead of me....