40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Jun 5 14:47:28 2012, Jamie, Update, CDS, new c1tst model for testing RCG code 
    Reply  Thu Jul 26 12:10:28 2012, Den, Update, CDS, new c1tst model for testing RCG code 
       Reply  Fri Jul 27 14:27:14 2012, Jamie, Update, CDS, new c1tst model for testing RCG code 
Message ID: 7037     Entry time: Thu Jul 26 12:10:28 2012     In reply to: 6755     Reply to this: 7043
Author: Den 
Type: Update 
Category: CDS 
Subject: new c1tst model for testing RCG code 

Quote:

I made a new model, c1tst, that we can use for debugging the FREQUENT RCG bugs that we keep encountering.  It's a bare model that runs on c1iscey.  Don't do any thing important in here, and don't leave it in some crappy state.  Clean if up when you're done.

 I wanted to test biquad form in this model. I added biquad=1 flag to cdsParameters, compiled, installed and restarted it. After that c1iscey suspended.

The same thing as we had several month ago

controls@c1iscey /opt/rtcds/caltech/c1/target/c1tst/c1tstepics 0$ cat iocC1.log

Starting iocInit
iocRun: All initialization complete
sh: iniChk.pl: command not found
Failed to load DAQ configuration file

ELOG V3.1.3-