40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Jun 5 09:32:12 2012, steve, Update, SUS, PRM oscillation  PRMosc.png
    Reply  Wed Jun 6 09:27:09 2012, steve, Update, SUS, PRM damping restored  PRMwhat.png
       Reply  Thu Jun 7 08:12:20 2012, steve, Update, SUS, PRM is still oscillating PRMoscil.png
          Reply  Thu Jun 7 13:18:42 2012, rana, Update, SUS, PRM is still oscillating 
             Reply  Thu Jun 7 13:25:37 2012, Koji, Update, SUS, PRM is still oscillating 
                Reply  Thu Jun 7 18:46:13 2012, yuta, Update, SUS, PRM oplev centered 
Message ID: 6785     Entry time: Thu Jun 7 13:18:42 2012     In reply to: 6781     Reply to this: 6786
Author: rana 
Type: Update 
Category: SUS 
Subject: PRM is still oscillating 

  Set the PRM OL servo gains to zero until someone can take care of this. Turning off the buttons doesn't help anything if people run the alignment scripts.

ELOG V3.1.3-