Quote: |
- there are no oplev signals in MC1, MC2, and MC3
- Something is wrong with PRM. He is very noisy. Turning on his oplev servo makes him go crazy.
|
None of the 3 MC optics have oplevs, so there shouldn't be any oplev signals. Although MC2 has the trans QPD, which was once (still is??) going through the MC2 oplev signal path.
PRM was noisy last week too. But turning on his oplev shouldn't make him crazy. That's not so good. Try restoring PRM (the ! near the PRM label on the IFO align screen), then checking if his oplev is ~centered. Maybe PRM wasn't in the nominal position at the time you restored from. |