40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Apr 17 11:05:04 2012, Jamie, Update, CDS, CDS upgrade in progress 
    Reply  Tue Apr 17 19:03:09 2012, Jamie, Update, CDS, CDS upgrade in progress 
       Reply  Wed Apr 18 19:59:48 2012, Jamie, Update, CDS, CDS upgrade success 
          Reply  Fri Apr 20 19:54:57 2012, Jamie, Update, CDS, CDS upgrade problems 
             Reply  Sat Apr 21 17:38:19 2012, Jamie, Update, CDS, dtt, dataviewer working; problem with trend frames 
                Reply  Sat Apr 21 21:10:34 2012, Jamie, Update, CDS, trend frame issue partially resolved 
                   Reply  Tue Apr 24 14:35:37 2012, Jamie, Update, CDS, limited second trend lookback 
             Reply  Sat Apr 21 20:40:28 2012, Jamie, Update, CDS, framebuilder frame writing working again 
          Reply  Tue Apr 24 14:55:00 2012, Jamie, Update, CDS, cds code paths (rtscore, userapps) have moved 
Message ID: 6541     Entry time: Tue Apr 17 19:03:09 2012     In reply to: 6540     Reply to this: 6546
Author: Jamie 
Type: Update 
Category: CDS 
Subject: CDS upgrade in progress 

Upgrade progresses, but not complete.  There are some relatively minor issues, and one potentially big issue.

All new software has been installed, including the new epics that supports long channel names.

I've been doing a LOT of cleanup.  It was REALLY messy in there.

The new framebuilder/daqd code is running on fb.

Models are compiling with the new RCG and I am able to get them running.  Some of them are not compiling for relatively minor reasons (the simulink models need updating).  I'm also running into compile problems with IOPs that are using the dolphin drivers.

The major issue is that the framebuilder and the models are not syncing their timing, so there's no data collection.  I've spoken to Alex and he and Rolf are going to come over tomorrow to sort it out.  It's possible that we're missing timing hardware that the new code is expecting.

There are still some stability issues I haven't sorted out yet, and I have a lot more cleanup to do.

At this rate I'm going to shoot for being done Thursday.

ELOG V3.1.3-