I tried to measure the beam profiles at the POP and POX ports as Koji mentioned in his entry (#6421).
However it turned out that the beam powers were too small to be measured with our beam scan at those ports.
So I will move on to measurements at the REFL port as Rana suggested because the laser power is much larger than that of POP and POX.
(If the data of the POP and POX beam profiles turn out to be very necessary, we will do the razor blade technique with a more sensitive photo diode)
Quote from #6421 |
More precise analysis can be done with quantitative analysis of those two spots with Beamscan. This could happen tomorrow.
|
|