40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 6318     Entry time: Fri Feb 24 19:25:43 2012
Author: jamie 
Type: Update 
Category: LSC 
Subject: ALS X-arm beatbox added, DAQ channels wiring normalized 

I have hooked the ALS beatbox into the c1ioo DAQ.  In the process, I did some rewiring so that the channel mapping corresponds to what is in the c1gcv model.

The Y-arm beat PD is going through the old proto-DFD setup.  The non-existant X-arm beat PD will use the beatbox alpha.

Y coarse I (proto-DFD) --> c1ioo ADC1 14 --> C1:ALS_BEATY_COARSE_I
Y fine   I (proto-DFD) --> c1ioo ADC1 15 --> C1:ALS_BEATY_FINE_I
X coarse I (bbox alpha)--> c1ioo ADC1 02 --> C1:ALS_BEATX_COARSE_I
X fine   I (bbox alpha)--> c1ioo ADC1 03 --> C1:ALS_BEATX_FINE_I

This remapping required coping some filters into the BEATY_{COARSE,FINE} filter bank.  I think I got it all copied over correctly, but I might have messed something up.  BE AWARE.

We still need to run a proper cable from the X-arm beat PD to the beatbox.

I still need to do a full noise/response characterization of the beatbox (hopefully this weekend).

ELOG V3.1.3-