40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Dec 26 14:01:45 2011, kiwamu, Update, LSC, multiple-LOCKIN newly added multiple-lockin.png
    Reply  Tue Dec 27 22:17:56 2011, kiwamu, Update, LSC, multiple-LOCKIN new screens Untitled.png
Message ID: 6150     Entry time: Mon Dec 26 14:01:45 2011     Reply to this: 6152
Author: kiwamu 
Type: Update 
Category: LSC 
Subject: multiple-LOCKIN newly added 
The multiple LOCKIN module has been newly added on the LSC realtime model.
The purpose is to demodulate ALL the LSC sensors at once while a particular DOF is excited by an oscillator.
So far the model has been successfully compiled and running okay.
I will make some MEDM screens for this multiple-LOCKIN system.

(Some details)

The picture below is a screen shot of the LSC real time model, zoomed in the new LOCKIN part.


The LOCKIN module consists of three big components:

  1. A Master oscillator
    • This shakes a desired DOF through the LSC output matrix and provides each demodulator with sine and cosine local oscillator signals.
    • This part is shown in the upper side of the screen shot.
    • The sine and cosine local oscillator signals appear as red and blue tags respectively in the screen shot.
  2. An input matrix
    • To allow us to select the signals that we want to demodulate.
    • This is shown in the left hand side of the screen shot.
  3. Demodulators
    • These demodulators demodulate the LSC sensor signals by the sine and cosine signals provided from the master oscillator.
    • With the input matrix fully diagonalized, one can demodulate all the LSC signals at once.
    • The number of demodulators is 27, which corresponds to that of available LSC error signals (e.g. AS55_I, AS55_Q, and etc.).
    • This part is shown in the middle of the screen shot.
ELOG V3.1.3-