40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Nov 25 18:45:31 2011, Den, Rana, Summary, SUS, Excess Noise in Digital Filtering FiltNoise.png
    Reply  Fri Nov 25 19:45:36 2011, Mirco, Den, Summary, SUS, Excess Noise in Digital Filtering sus_coh-crop.pdflsc_coh-crop.pdf
Message ID: 6007     Entry time: Fri Nov 25 18:45:31 2011     Reply to this: 6008
Author: Den, Rana 
Type: Summary 
Category: SUS 
Subject: Excess Noise in Digital Filtering 

We are now trying to understand why the coherence between SUS-X_SUSPOS_IN1 and SUS-X_SUSPOS_OUT is lost below 1 Hz for X = MC1, MC2, MC3, BS, ITMX, ITMY, ETMX, ETMY, SRM. It is OKEY only for PRM but the different filteres are used there. For PRM - 30:0.0 and Bounce Roll, for all others - 30:0.0 and Cheby. The transfer functions between these two signals plotted in foton and fft tools are also not the same.

If we switch off all the filters between these 2 signals, than the coherence is one. If one of the filters is switched on, everything is also fine. But if there are several present, than they filter the signal in unexpected way.

Moreover it seems that the coherence is dependent on the input signal. The coherence is better with local dumping than without.

Attachment 1: FiltNoise.png  73 kB  | Hide | Hide all
FiltNoise.png
ELOG V3.1.3-