40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Nov 17 15:19:06 2011, steve, Update, SUS, Ti spring plunger to hold OSEM is not affortable 20111116111042405.pdfP1080216.JPG
    Reply  Fri Jan 27 09:05:41 2012, steve, Update, SUS, OSEM locking plunger 
       Reply  Fri Mar 30 10:24:14 2012, steve, Update, SUS, new OSEM locking plunger new_OSEM_locker_screw.jpgIMG_0109.JPGIMG_0111.JPG
Message ID: 5927     Entry time: Thu Nov 17 15:19:06 2011     Reply to this: 6232
Author: steve 
Type: Update 
Category: SUS 
Subject: Ti spring plunger to hold OSEM is not affortable 

Our existing 300 series SS plungers from McMastercar #8476A43 are silver plated as Atm2 shows.

Problems:  1, they become magnetized after years being close to the magnets

                     2, they oxidize by time so it is hard to turn them

                    

I looked around to replace them.

Titanium body, nose and beryllium copper spring. None magnetic for UHV enviorment.

Can be made in 7 weeks at an UNREASONABLE $169.00 ea at quantity of 50

Attachment 1: 20111116111042405.pdf  175 kB  | Hide | Hide all
20111116111042405.pdf
Attachment 2: P1080216.JPG  2.389 MB  | Hide | Hide all
P1080216.JPG
ELOG V3.1.3-