40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Nov 4 15:26:54 2011, Jenne, Update, LSC, LSC model recompiled 
    Reply  Mon Nov 7 15:15:21 2011, Jenne, Update, LSC, LSC model recompiled 
    Reply  Mon Nov 7 15:43:25 2011, jamie, Update, LSC, LSC model recompiled 
Message ID: 5833     Entry time: Mon Nov 7 15:43:25 2011     In reply to: 5812
Author: jamie 
Type: Update 
Category: LSC 
Subject: LSC model recompiled 

Quote:

While trying to compile, there was something wrong with the lockins that were there...it complained about the Q OUTs being unconnected.  I even reverted to the before-I-touched-it-today version of c1lsc from the SVN, and it had the same problem.  So, that means that whomever put those in the LSC model did so, and then didn't check to see if the model would compile.  Not so good.

Anyhow, I just terminated them, to make it happy.  If those are actually supposed to go somewhere, whoever is in charge of LSC lockins should take a look at it.

 This was totally my fault.  I'm very sorry.  I modified the lockin part to output the Q phase, and forgot to modify the models that use that part appropriately.  BAD JAMIE!  I'll check to make sure this won't bite us again.

ELOG V3.1.3-