40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Nov 4 15:26:54 2011, Jenne, Update, LSC, LSC model recompiled 
    Reply  Mon Nov 7 15:15:21 2011, Jenne, Update, LSC, LSC model recompiled 
    Reply  Mon Nov 7 15:43:25 2011, jamie, Update, LSC, LSC model recompiled 
Message ID: 5832     Entry time: Mon Nov 7 15:15:21 2011     In reply to: 5812
Author: Jenne 
Type: Update 
Category: LSC 
Subject: LSC model recompiled 


I moved the place where we take the OAF Degree of Freedom signals from - now it's the error point rather than the feedback for DARM, CARM, MICH, PRCL, SRCL, XARM and YARM.  I didn't do anything to MCL.

While trying to compile, there was something wrong with the lockins that were there...it complained about the Q OUTs being unconnected.  I even reverted to the before-I-touched-it-today version of c1lsc from the SVN, and it had the same problem.  So, that means that whomever put those in the LSC model did so, and then didn't check to see if the model would compile.  Not so good.

Anyhow, I just terminated them, to make it happy.  If those are actually supposed to go somewhere, whoever is in charge of LSC lockins should take a look at it.

Also, as Mirko mentioned in the previous elog 5811, we wanted to calculate the effect on the MC without actuating, so we put in a new summing point and a filterbank so we have testpoints.

LSC model recompiled.

OAF model recompiled.

FB restarted because of the new channels added to OAF.

 After Rana pointed out the errors of our ways, we reverted all of these changes.

ELOG V3.1.3-