40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Nov 1 19:26:38 2011, Zach, Update, SUS, "Dr. SUS" progress 
    Reply  Wed Nov 2 01:53:08 2011, Zach, Update, SUS, "Dr. SUS" progress 
       Reply  Wed Nov 2 11:29:04 2011, not Zach, Update, SUS, "Dr. SUS" progress 
Message ID: 5784     Entry time: Wed Nov 2 11:29:04 2011     In reply to: 5781
Author: not Zach 
Type: Update 
Category: SUS 
Subject: "Dr. SUS" progress 


Now that NDS2 is working, I was able to run all parts of diagAllSUS (except for the matrix writing) without errors. Barring issues with standard commands (freeswing, turnOnWatchDogs.csh, caput, etc.), Dr. SUS should be ready to go.

As requested, I have suppressed the generation of an elog post containing the results of the diagonalization.

Dr. SUS will run on allegra as a cron job at 8:00am on Sundays:

allegra:peakFit>crontab -l




01 05 * * 0 cat /cvs/cds/caltech/users/kiwamu/work/20091026_OMC-LSC-diag/src/OMC_LSC_timing.m | matlab -nosplash -nodesktop > /dev/null


0 8 * * 0 /cvs/cds/rtcds/caltech/c1/scripts/SUS/peakFit/runDrSUS

Also: should these variable definitions really be here? 

Cron starts with only a very minimal PATH.  However, this shouldn't be an issue if you specify the full path to the commands.

The rest of the env vars should probably not be there.

Also, Zach:  using /cvs/cds is now forbidden.  We need to put this script in the right place.

ELOG V3.1.3-