| Quote: |
|
For the acquisition of the MC_F channel, I suggest taking the FAST_MON BNC output from the blue FSS interface card in the Eurocard crate in the PSL rack. This can then be piped into the 2-pin LEMO plug (Ch. 1) of the Generic Pentek DAQ card which used to acquire the MC_L signal from the MC Servo Board.
|
[Jenne, Den]
Suresh tells us that he already has this channel physically plugged in. Probably as a result of Valera's MCASS work. Neat. We just have to make the channel. Right now the signal goes straight into some lockin stuff, so there is no actual "C1:IOO-MC_F" channel.
We don't want to make the new channel right now, since it is nighttime, and Kiwamu and Suresh are working on things. So. Tomorrow. In the morning:
We will add a fast test point to the C1IOO model, and call it "C1:IOO-MC_F". We will also route this signal via memory stuff over to the OAF model so that we can do adaptive filtering on the MC. Then we will compile all the things. Or at least all the things that we touched. This will go hand-in-hand with the compling of Mirko's sweet new OAF model, which we were planning on compiling in the morning anyway. Neat.
Things to compile tomorrow: c1ioo and c1rfm, because of channel routing. c1oaf because of all the new stuff. That should be all. |