40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Sep 15 22:31:44 2011, Manuel, Update, SUS, Summary screen sussum.png
    Reply  Mon Sep 19 18:05:27 2011, rana, Update, SUS, Summary screen sussum.png
       Reply  Wed Sep 21 16:22:14 2011, rana, Update, SUS, Summary screen 
Message ID: 5500     Entry time: Wed Sep 21 16:22:14 2011     In reply to: 5467
Author: rana 
Type: Update 
Category: SUS 
Subject: Summary screen 

The SUS SUMMARY screen is now fully activated. You should keep it open at all times as a diagnostic of the suspensions.

No matter how cool you think you are, you are probably doing something bad when trying to lock, measure any loop gains, set matrices, etc. Use the screen.


This is the link to the automatic snapshot of the SUS SUMMARY screen. You can use it to check the Suspensions status with your jPhone.

Auto SUS SUMMARY Snapshot

When the values go yellow its near the bad level. When its red, it means the optic is misaligned or not damped or has the wrong gain, etc.

So don't ignore it Steve! If you think the thresholds are set too low then change them to the appropriate level with the scripts is SUS/

ELOG V3.1.3-